Setting up a wifi connection. How to set up a wireless network connection (Wi Fi)

Since now there are several computers in each apartment and mobile devices with Wi-Fi, often ordinary users have a question about how the setup is done wireless network. In this article, we will shed light on this slippery question. As an example, setting up a wireless network in Windows 7 will be given.

First you need to set up main computer our future network. It can be either a laptop or To do this, activate the Wi-Fi adapter on our computer. Then open the menu and right click manipulator, click on the computer, where in the context menu, click on the properties. After that, we go to Extra options system and click on the computer name, and in the column "Description" we give our description, for example, "Vladimir Ilyich's Computer". Next, select "Change" and give a name to this device, which should not be duplicated by others on the network. In the column " Working group"specify the name of this group, which should be the same on all devices in our network, and reboot.

When the computer restarts, the wireless network setup continues. Select the wired connection icon and go to "Network Management", where we click on "Wireless Network Management". In the menu that appears, select "Add" and then there is the wireless setup. Here you also have to come up with a name for your network, whatever you want. Then select "WPA2 Personal Security". If there are devices on the network on the Windows XP platform, then select "WEP".

After that, set the password, click "Next" and in the new dialog that appears, allow sharing Internet for network computers, and then close the window.

But that's about setting up the wireless network Now our task is to set up the rest of the computers on this network. Turn on the wireless adapter, open the Start button menu. We continue by clicking the button on the right side of the manipulator on the "Computer" icon, where we select "Properties and advanced system settings". Now click on the "Computer Name" section and give it your individual name. Next, specify the group name, which must match the group name on the host computer.

Again we go to network management, where we go to the "Change adapter settings" section and select "Properties", after which we jump on the version 4 protocol line. Here we note the point of setting the IP address. In the column "IP-address" we assign our own to this computer, and this must be done, starting from the IP of the main PC. For example, if the IP of the main device is 192.168.0.1, then the IP of all computers will be the same, except for the last digit. It is very important that there are no identical IPs in the network. In the column we type 255.255.255.0, and in the line there will be the IP address of the main computer. In the fields "Preferred DNS server" and "Alternative DNS server" specify the addresses of the provider.

After all these manipulations, we accept the changes. And only now we go into network connections, select our network, enter the password, and that's it. If there are no more computers on the network, this completes the wireless network setup. If there are still some computers or laptops, then in this case it is necessary to repeat the procedure for setting up the last computer.

I would like to add my own recommendations for securing the network. Recently, cases of intrusion into wireless networks by unauthorized users have become more frequent. Be sure to install on the host computer antivirus program. Also come up with a long and complex password with large and small letters interspersed with numbers. This will increase security and minimize the risk of interference with the work of unauthorized persons, as well as prevent the theft of valuable information and the downloading of third-party software.

With the advent wireless connection people have acquired amazing mobility. Thanks to Wi-Fi, high-speed Internet has become available, no matter where you are - at work, in a cafe or at home. The main thing is that this place is included in the network coverage area.

You will need

• connected wifi router working computer with operating system Windows client for wireless networking

Instruction

If the "Wireless Networks" tab in the "Wireless Network Connection" - "Properties" window is missing for some reason, click the OK button. Enter the "Start" menu, select "Settings" and go to "Control Panel".

In the new Control Panel window, do double clicks on the icons "Administration" and "Services".

Make sure the service " Wireless setup» is in working order. Otherwise, double-click the "Wireless Settings" icon, and in the new properties window, click the "Start" button and OK. Return to the "Network Connections" window. Right-click on the "Wireless Network Connection" icon to open the drop-down menu and go to "Properties".

Make sure the "Use Windows to set up network" button is checked on the "Wireless Networks" tab.

Hi all! It's me again. Let me start with an excursion into history. The Windows 7 operating system has been available since the end of 2009. Until now, this version occupies a leading position among users. Only in 2018 did she give the championship to the top ten. I have friends who consider the "seven" better latest version OS. But I think it's a matter of habit.

Well, since Windows 7 is so popular, let me tell you about setting up a Wi-Fi wireless network for this “OS”. I think the article will be relevant for a long time. Let's get started already.

Where to begin?

If you are going to connect a Windows 7 PC or laptop to Wi-Fi for the first time, then you need to start with the router settings. Yes, yes, this very network must first be configured. If you have connected the device for a long time, then, most likely, everything is configured there. But it doesn't hurt to check.

I’ll tell you using the example of routers from TP-Link (I assume that the Internet via cable is already working):

1. We go to the "admin". Our regular readers already know by heart how to do it. In the address bar of any browser, enter the address of the device. In the window that opens, we drive in the data for authorization. Look for all the information on your router, at the bottom.
2. Go to menu " Wireless mode". The network settings must specify its name, region, channel, operating mode, channel width. Make sure the "Enable SSID Broadcast" option is checked. Otherwise, you will have to enter data every time you connect on all devices. In this section, you need to remember the SSID (name).

1. Go to the security settings section. Here you select the encryption version and set the password (security key) to access the Wi-Fi network. You need to know this key. You can write it down on a piece of paper.

Module activation

Here is a visual guide:

Now you need to turn on the wireless signal receiver - the Wi-Fi adapter. On laptops, this is done with a key combination - Fn + one of the function buttons (depending on the model). On my Acer it's F2.

On a desktop PC, you need to go to the "Device Manager", open the tab "Network cards" ("Network adapters"). There, see if there is a device with the word "Wireless" in the name (maybe the word Wi-Fi or 802.11 b / g / n).

If there is, then everything is ok. You just need to activate. Right-click and select Engage. If the module is not found, you will have to buy it separately.

Drivers

There are usually no problems with adapter drivers on laptops. If you have a PC and an external Wi-Fi module, you need to install the firmware. There are two options - use the disk that was included, or download it from the manufacturer's website.

Setting

If you like instructions in video format, see here:

Now it's the turn to tell you how to set up Wi-Fi on the "seven". Follow my instructions and you'll be fine.

1. We go to the "Start" (the icon in the left corner in the system tray with the image of the Windows logo). Select "Control Panel" from the list on the right.

1. Go to the "Network and Internet" menu, and then to the first section on the "Network Control Center ..." page.

1. On the left side, select "Change adapter settings". Since we are setting up a Wi-Fi network on Windows 7, we click on the wireless connection type of the PCM and select "Properties".

1. The Network window will open. There we need to highlight and mark protocol version 4. If there is a "bird" on version 6, it must be removed. In the same window, click on "Properties".

1. Here you need to set automatic acquisition of IP and DNS servers. Don't forget to click OK.

Connection

Half done. It remains to connect our computer with Windows 7 to a wireless network, and how to do this, read in this section.

1. Going back to settings network connections and click on the wireless connection. Now you need to double click.

1. In the window that opens, select the option with on/off. A list will open available networks, choose yours and click "Connect".

1. Now you need to enter a password. If you forgot or do not know, remember, I talked about this above, in the first section. Have you entered a key? Click OK.

1. Now in the list of networks next to yours there is a status of "Connected". All. You can use.

If you need to change the details of a wireless connection, right-click on it and select "Properties". In the "Connection" tab - information about the network name, in the "Security" section - the password.

Is there no Wi-Fi icon in the Windows taskbar or in the Network and Control Center menu? This does not mean that the equipment is out of order. Equipment breakdown is just one of the probable causes. In some cases, you can do it yourself.

What to do if there is no "Wireless Network Connection" icon.

This problem appears if:

Is there a Wi-Fi receiver?

If the receiver is not installed on the computer, then you will not see the Wi-Fi network icon. But how to check what kind of adapter you have? The simplest thing is to look at the characteristics of the PC. Laptops should have a sticker that lists the specifications of the device. Another option is to find out the adapter model and find information about it. Do you have a desktop computer? Then search for system unit modem ports. If an antenna is installed there, then the product is suitable for working via Wi-Fi.

And the easiest way:

1. You need the Windows Control Panel.
2. Open "Device Manager". It's in the Hardware and Sound category.
3. Expand the "Network adapters" menu.
4. See if there are any models that say "Wirelles", "802.11" or "WiFi".

If there are no such inscriptions, you will not be able to set up a wireless connection. But you can purchase a Wi-Fi module or a network card that already has an antenna. There are also external Wi-Fi receivers.

Driver

Windows usually loads the software it needs on its own. But if the driver network equipment is missing or damaged, it must be installed manually.

To connect, you need to download the software. There are several ways. The first is suitable if the driver was installed incorrectly.

1. In the Dispatcher, right-click on the item with yellow triangle.
2. Select "Delete" and confirm the action.
3. Restart your computer.
4. After starting Windows will "detect" the presence of a new device.
5. If this does not happen, go to the Manager again.
6. Highlight any item.
7. "Actions - Update Configuration".

This will only work with equipment that is installed on a Plug and Play basis. The software for these devices boots automatically. You can use them immediately after connection. If the board, in general, does not have such a function:

1. Highlight any item in the Dispatcher.
2. "Actions - Install old device"
3. An explanation window will open. Click next.
4. Check " Automatic search” or “Manually”.
5. Select "Network adapters".
6. If you know the model and type of gadget, find it in the list.
7. Wait for the installation to finish.

To download an update for outdated software:

1. In the Manager, right-click on the device.
2. In the drop-down list, click on "Update driver". This option will be active if Windows has determined the hardware model.
3. Select "Automatic search" so that the system finds the software on the network and downloads it.
4. Or click "Search on computer" to specify the path to the installer.

A disc should come with a new Wi-Fi adapter or laptop. From it you can download the necessary software. If you don't have a driver CD and the system didn't find it on its own:

1. Go to the network equipment manufacturer's website.
2. Copy the model name into the search bar.
3. Open the page with information about your adapter.
4. Download software from there. It's usually located under Support, Downloads, Files, or Programs.

Exist special applications to install system software. For example, Driver Booster. It determines the hardware model and loads for it current versions drivers.

Settings

You may have the wrong network configuration. To connect to Wi-Fi, you need to configure it. Run diagnostics first.

To connect to an access point, the Wi-FI module must be active. On laptops, it can be controlled using a keyboard shortcut. Which buttons to press depends on the gadget model. For example, "Fn + F5", "Fn + F7" or "Fn + F9". They have corresponding pictures. But sometimes users touch them by accident. Yes, and on a stationary computer, the Wi-Fi module can be disabled. For settings:

Now you can reconnect "over the air" if the Wi-Fi icon disappears. But if network board still broke, it is better to contact the master in service center.

Imagine being able to surf the Internet while sitting on the couch in your room, chatting with friends online from the comfort of your cozy bed at night, or sending documents from your kitchen computer to your home office printer. The wireless network has the greatest possible flexibility and does not require complex configuration. This article describes the steps to set up and start a wireless network.

Before you begin setting up your wireless network, you will need the following items.

A broadband Internet connection is a high-speed connection, unlike a dial-up connection, which has a low data rate and is not powerful enough for a wireless network to work. The most common broadband connection methods are DSL lines and cable. To get a broadband connection, you need to contact your Internet Service Provider. Internet connections using DSL lines are usually provided by telephone companies, and cable connection available from companies that cable TV. Internet Service Providers usually provide high speed modems and may even connect them to your computer. Some vendors may even offer a bundle - a modem and wireless routers. This equipment can also be found in stores that sell computers and electronics.

Example of cable modem (left) and DSL modem (right)

The router provides data exchange between the local network and the Internet. With a wireless router, instead of wires and cables, computers are connected to the local network using radio signals. There are several various types wireless network technologies, including 802.11a, 802.11b, 802.11g, and 802.11n. It is recommended that you use routers that support 802.11g or 802.11n as these routers provide a high throughput and strong radio signal. For more information about wireless LAN technologies, see Wireless Networking FAQ.

Wireless Router Example

A network adapter is a device that connects a computer to a local network. To connect a laptop or desktop computer to a wireless local network, a wireless network adapter is required. Many laptops and desktop computers have built-in wireless network adapters. To check if a wireless network adapter is installed on your computer, follow these steps:

Open device manager. To do this, click the Start button, select Control Panel, System and Security, and then under System, select Device Manager.‌ If you are prompted for an administrator password or confirmation, type the password or provide confirmation.

Double-click the Network cards icon.

Find network adapter, which has the word "wireless" in its name.

If your computer does not have a wireless network adapter installed, you can buy one from a computer or electronics store and install it yourself. We recommend using Universal Serial Bus (USB) based adapters. These adapters are small, easy to install and transfer from one computer to another. Make sure adapters are of the same type as wireless router. The type of adapter is usually indicated on the packaging - usually a letter, such as G or A.

Examples of USB Wireless Network Adapters

After all the equipment has been purchased, you will need to install a modem and set up an Internet connection. If the modem was not installed by an ISP representative, follow the instructions in the modem's documentation to connect the modem to your computer and the Internet. If using a DSL line, connect the modem to the telephone jack. If using a cable, connect the modem to a cable outlet. For more information, see Set up a high-speed cable or DSL connection.

Install your wireless router in a location where it will receive the strongest signal with the least amount of interference. For achievement best results follow the tips below.

Locate your wireless router in the center of your service area. Install your router as close to the center of your home as possible to ensure the best possible radio signal in all areas of your home.

Place the wireless router higher off the floor and away from walls and metal objects such as metal cabinets. The fewer physical obstacles between the computer and the router, the better more likely that the signal strength of the router will be fully utilized.

Reduce interference. 802.11g network equipment uses 2.4 GHz radio frequencies. This frequency is also used by many microwave ovens and cordless phones. When you turn on the microwave oven and make a cordless phone call, the radio signal may be affected by interference. Many problems can be avoided by using wireless phone working for more high frequency, for example 5.8 GHz.

Security is always important, but especially in the case of a wireless network, as the network signal can reach outside the building. If you do not secure the network, then people nearby who have a computer can access information stored on network computers and access the Internet through your connection. To secure your local network, follow these steps:

Protect your router by changing the default username and password. Many manufacturers provide a default username and password for the router, as well as a default network name. This information can be used to gain unauthorized access to the router. To avoid this, you need to change the default username and password for the router. Check the device documentation.

Set up a network security key. Like keys for cabinets and security combinations for safes, wireless LANs define network security keys to help protect the network from unauthorized access. Follow these steps to set up a network security key.

1. Open the Network and Sharing Center component. To do this, click the Start button and select Control Panel. In the search box, type network, and then select Network and Sharing Center.

   Click Create and set up a new connection or network.

   Select Create & Customize new network and click Next.

The wizard will help you create a network name and a security key. The wizard will prompt you to use the Wi-Fi Protected Access (WPA or WPA2) method by default if the router supports it. WPA2 is recommended whenever possible because it provides a higher level of security than WPA or WEP (Wired Equivalent Privacy). WPA2 or WPA methods also allow you to use passphrases, eliminating the need to remember secret sequences of letters and numbers. For more information, see Wireless network security methods.

Write down the security key and keep it in a safe place. You can also save the security key to a USB flash drive by following the wizard.

Use a firewall. A firewall is software or hardware that helps protect your computer from intruders or malware. Using a firewall on each computer on the local network allows you to control the spread of malware over the network, as well as protect computers when accessing the Internet. windows firewall included in this windows version. For more information, see Firewall FAQ.

To connect a laptop or desktop computer to a wireless network, follow these steps:

Open the Network Connection component by right-clicking the network (or) icon in the notification area.

In the list of networks, select the network you want to connect to and click the Connect button.

Enter the security key. You can enter the security key manually, or insert the USB flash drive containing the key into the computer's USB port.

Many users have wireless networks that allow them to access the Internet from any room in their home, but would like to have wireless access to files and printers.

The simplest way share files on the network - set up sharing with home group. If there is no homegroup, you can share files by placing them in one of the shared folders. Any file or folder placed in a shared folder is automatically made available to other users connected to the local network. To share a shared folder, follow these steps:

In the Shared folder access section, select one of the following options.

• Turn on sharing to network users could read and write files in shared folders.

  Turn off sharing (Users who are signed in to this computer will have access to shared folders).

The described steps must be repeated on each computer whose files you want to share.

To share files, save or copy them to a public folder on your computer. A shared folder is provided for each type of library (Documents, Music, Videos, and Pictures). Each user who has account on this computer can use this folder. For example, to open the Shared Documents folder, follow these steps:

1. Open the document library. To do this, click the Start button and select Documents.

   In the Navigation Pane, under the Libraries node, double-click Documents, and then double-click Shared Documents.

Shared Documents Folder

If a printer is connected to one of the computers, you can print to it from any computer connected to the wireless network. The easiest way to share a printer is to check the Printers box when setting up your homegroup. If you don't have a homegroup, you can do the following:

Log on to the computer to which the printer is connected.

Open the "Advanced Sharing Options" section. To do this, click the Start button and select Control Panel. Type network in the search box, select Network and Sharing Center, and then in the Navigation Pane, click Change advanced sharing settings.

Click the double quote icon to expand current profile networks.

Under File and Printer Sharing, click Turn on file and printer sharing, and then click Save Changes. If you are prompted for an administrator password or confirmation, enter the password or provide confirmation.

If password-protected sharing is enabled, users will need to have an account and password for that computer to access the printer.

To access the printer from another computer on the network, follow these steps.

Open the Network component To do this, click the Start button and select Control Panel. In the search box, type network, and then under Network and Sharing Center, select View network computers and devices.

Double-click the icon for the computer to which the printer is connected.

Double-click the printer icon. windows will automatically add the printer to the computer and install the printer driver.

That's all - the wireless network is ready to go. You can stretch out on the couch or sit on the balcony while surfing the Internet, sending email or buying something interesting.

sites.google.com

My laptop does not have a Wi-Fi network connection

When trying to connect a laptop to WiFi networks, many are faced with a problem when there is no wireless connection on the laptop. Simply put, there is no Wi-Fi. The notification panel does not show a Wi-Fi network icon, there are no networks available for connection, and there are no adapters in the management of adapters wireless adapter: "Wireless network connection", or "Wireless network". If you have windows computer 10, and the same problem, when there is simply no Wi-Fi, then see a separate article: How to turn on Wi-Fi in windows 10 when there is no Wi-Fi button and the error “Could not find wireless devices on this computer." Well, now we will try to deal with this problem on windows example 7.

This problem looks like this. On the notification panel, most likely there will be such an Internet connection status:

And if you go to Control Panel \ Network and Internet \ Network Connections, then most likely you will not find a wireless adapter there, but it should be there.

This is the whole problem, of course, that Wi-Fi will not work, and there is no way to turn it on. Even the tips from this article will not help in any way, most likely.

Two conclusions can be drawn from this:

• Your computer or laptop does not have a wireless adapter at all, the board itself. If you have a desktop computer, then most likely it is, and to connect to Wi-Fi, you need to buy and install an external or internal wifi adapter. I have already written about how to connect a PC to a wireless network. If you have a laptop, then the adapter must be built-in.
• Driver not installed. It is because of this that most often it is impossible to find on a laptop wireless connection.

It turns out that there is no Wi-Fi on the laptop, and the Internet works only via cable. Now we will check it and fix it.

Why is there no Wi-Fi on the laptop?

As I wrote above, the problem is most likely in the drivers. Therefore, let's go to the device manager and see what's there. To open Device Manager, you can go to "Computer", right-click on an empty area, select properties, and in a new window, on the left, open Device Manager.

Or, press the key combination Win + R, copy the command devmgmt.msc into the field and click Ok.

In Device Manager, click the Network Adapters tab. Most likely, you will have only one adapter there - a network card. And in the device manager itself there will be unknown devices with a yellow icon (at least one device). Like that:

In this case, you need to install the driver on Wi-Fi. How to do this, I wrote in separate instruction: how to install drivers on a Wi-Fi adapter in windows 7. After installing the necessary driver, everything will work and a wireless connection will appear. There may be another case when the driver is installed, but it does not work correctly. Near it will be yellow Exclamation point. In this case, also try to reinstall it.

I think after these steps you will be able to connect your laptop to the Internet wirelessly. If so, write in the comments, we will understand.

Windows 10 - all instructions for setting up the Internet and solving problems Setting up a router - instructions for different models and manufacturers Useful programs- to configure HotSpot, Wi-Fi, 3G/4G modems.

help-wifi.com

Velvet women's everyday life

How to create a wireless connection

If you once again ask yourself a similar question on computer topics, you should not call a paid specialist with a home visit. Be smarter, save your money and gain more knowledge on your own by simply reading this article. It will bring you significant benefits:

Teach you how to create a wireless connection

Clearly and correctly explain the essence of this concept

Will create the basis for your intellectual and creative development in the field of programming

Create a wireless connection in windows 7

If you're ready to learn how to create a wireless connection, check out the included instructions:

1. Click on START, find the CONTROL PANEL tab

2. Change the type of page being viewed (right upper corner) on VIEW: CATEGORY; immediately select the option VIEW NETWORK STATUS AND TASKS

3. Now we go to MEASURING ADAPTER PARAMETERS and open the WIRELESS NETWORK CONNECTION tab menu; open the PROPERTIES tab

4. Take a look at the GENERAL tab, and you will immediately notice the marked items that apply to a particular connection

5. We find in the open window Internet Protocol version 4 (TCP / IPv4) and mark it with a “tick”

Completing the process of creating a connection

Now, in order to visually verify the successful completion of the operation, you need to restart the computer. Now you know how to create a wireless connection, all that remains is to log in and connect to the network! As you can see, in this process There is nothing difficult to create a wireless connection. The most important thing is to act exactly with the indicated steps of the instructions, and you will definitely succeed. Successful completion of the procedure = access to the Internet on your computer.

Network connection settings in windows 7 video

video how to create a wireless network computer - computer

Setting up a wireless WI FI network for windowsvideo

ulada.ru

How to fix the missing "Wireless Network Connection" icon in windows

Is there no Wi-Fi icon on the windows taskbar or in the Network Center menu? This does not mean that the equipment is out of order. Equipment failure is only one of the possible causes. In some cases, you can set up a wireless connection yourself.

What to do if there is no "Wireless Network Connection" icon.

• 1 Reasons
• 2 Is there a Wi-Fi receiver?
• 3 Driver
• 4 Settings

Causes

This problem appears if:

Is there a Wi-Fi receiver?

If the receiver is not installed on the computer, then you will not see the Wi-Fi network icon. But how to check what kind of adapter you have? The simplest thing is to look at the characteristics of the PC. Laptops should have a sticker that lists the specifications of the device. Another option is to find out the adapter model and find information about it. Do you have a desktop computer? Then find the ports on the system unit for connecting the modem. If an antenna is installed there, then the product is suitable for working via Wi-Fi.

And the easiest way:

1. You need the "Control Panel" windows.
2. Open "Device Manager". It's in the Hardware and Sound category.
3. Expand the "Network adapters" menu.
4. See if there are any models that say "Wirelles", "802.11" or "WiFi".

If there are no such inscriptions, you will not be able to set up a wireless connection. But you can purchase a Wi-Fi module or a network card that already has an antenna. There are also external Wi-Fi receivers.

Driver

Windows usually loads the software it needs on its own. But if the network hardware driver is missing or corrupted, it must be installed manually.

To connect, you need to download the software. There are several ways. The first is suitable if the driver was installed incorrectly.

1. In the Dispatcher, right-click on the item with the yellow triangle.
2. Select "Delete" and confirm the action.
3. Restart your computer.
4. After windows startup"detect" the presence of a new device.
5. If this does not happen, go to the Manager again.
6. Highlight any item.
7. "Actions - Update Configuration".

This will only work with equipment that is installed on a Plug and Play basis. The software for these devices boots automatically. You can use them immediately after connection. If the board, in general, does not have such a function:

1. Highlight any item in the Dispatcher.
2. "Actions - Install old device"
3. An explanation window will open. Click next.
4. Check "Automatic search" or "Manual".
5. Select "Network adapters".
6. If you know the model and type of gadget, find it in the list.
7. Wait for the installation to finish.

To download an update for outdated software:

1. In the Manager, right-click on the device.
2. In the drop-down list, click on "Update driver". This option will be active if windows has detected the hardware model.
3. Select "Automatic search" so that the system finds the software on the network and downloads it.
4. Or click "Search on computer" to specify the path to the installer.

A disc should come with a new Wi-Fi adapter or laptop. You can download the necessary software from it. If you don't have a driver CD and the system didn't find it on its own:

1. Go to the network equipment manufacturer's website.
2. Copy the model name into the search bar.
3. Open the page with information about your adapter.
4. Download software from there. It's usually located under Support, Downloads, Files, or Programs.

There are special applications for installing system software. For example, Driver Booster. It determines the hardware model and downloads the latest driver versions for it.

Settings

You may have the wrong network configuration. To connect to Wi-Fi, you need to configure it. Run diagnostics first.

To connect to an access point, the Wi-FI module must be active. On laptops, it can be controlled using a keyboard shortcut. Which buttons to press depends on the gadget model. For example, "Fn + F5", "Fn + F7" or "Fn + F9". They have corresponding pictures. But sometimes users touch them by accident. Yes, and on a stationary computer, the Wi-Fi module can be disabled. For settings:

Now you can reconnect "over the air" if the Wi-Fi icon disappears. But if the network card is still broken, it is better to contact the master at the service center.

NastroyVse.ru

ByFly wireless settings on windows 7

Not everyone has the opportunity to connect to the Internet via fiber optic cable or twisted pair, and in an office, house or apartment, you should use wireless way connections (WiFi) to one network with the possibility of accessing each of them to the Internet. If this connection method is not suitable for a computer with windows 7, then using ByFly broadband on a laptop is the best option. Today we’ll look at how Wi-Fi is configured on a laptop running under windows control 7.

Set the parameters of the network card

First of all, you need to configure the network adapter.

• We go to the "Network Control Center".
• We go to the menu for editing adapter parameters.
• In the properties of the active connection, select the TCP / IP version 4 protocol and call the "Properties" of the connection.

• Enter the following parameters.

• Everywhere click "OK" to exit.

Connecting to the modem

Setting up Wi-Fi begins with connecting the modem and entering its configuration parameters on the laptop. For the first, use the instructions or the services of the wizard, and the interface where the modem is configured is entered by entering 192.168.1.x in the address bar. Instead of "x", enter 1 or 0 (depending on the device model).

A dialog box should appear asking you to enter your data to enter the menu where WiFi setup. We enter the standard value of both lines as "admin" and press "Enter".

Activate the WiFi module: look for the line "Access Point" (it should be on top) and move the checkpoint to the value "Activated" - active.

We go down to Broadcast SSID and activate the option by setting its value to "Yes".

We enter absolutely any value of the SSID - this is the name of the future Wi-Fi network, under which users of all devices located in the area of ​​​​the access point will see it.

See also: How to create a flash drive for windows installation 7

The data encryption type (Pre-Shared Key field) of the wireless connection is recommended to select WPA2-PSK due to the fact that it has the most advanced security mechanism used everywhere today.

The password must be changed to a strong one when the adapter is first configured.

Setting up on a laptop with an activated module WiFi networks and on a computer connected to the router that is running windows 7, it is carried out in a similar way.

Setting up the connection

Let's move on to setting up the wireless network itself on the laptop by setting the parameters for the modem adapter to work in router mode.

• Entering the modem interface, click on the "Interface Setup" button.
• Below we click "Wireless" - the parameter is responsible for turning on the Wi-Fi adapter.
• Go to the "Encapsulation" section and set the value of the only parameter as "PPPoA / PPPoE".
• After changing the appearance of the window, enter the username and password provided.
• Activate the "Bridge Interface" parameter.
• The value of the "Default Route" function is set to "Yes".
• Click "Save" to apply the new Wi-Fi adapter settings.

• After that, we restart the modem so that the new parameters become active.

After setting up the wireless network in windows 7, you can safely disconnect the modem and use the access point on your laptop by selecting a new WiFi connection and entering the password that protects it.

If all the instructions for configuring the wireless network are followed correctly, then the Internet connection will be made in a matter of seconds on a device with windows, Android or another operating system, the main thing is to be close to the signal source.

(Visited 1 775 times, 1 visits today)