Zte f660 default password. Setting up a ZTE router

Question: How to set up the Internet on smartphones (phones) and tablets ZTE?

Answer: Internet setup on ZTE devices is performed in the following order.

1. We connect the service with the operator. This can usually be done via a USSD request.

To connect to the Internet from Megafon, we recommend that you follow the link - http://www.megafon.ru/internet/, select the type of device to connect, for example - "For a smartphone", select your region, then select a tariff, click "Buy", after what information will appear, what code you need to dial to connect the service, for example - *236*0#. We dial this code like a regular phone number.

To connect the Internet from MTS, we recommend that you follow the link - http://www.mts.ru/mobil_inet_and_tv/, select the type of device to connect, for example - "Internet from phone", after which a page will open with a code that you need to dial to connect services, for example - *252#.

To connect to the Internet from Beeline, we recommend that you follow the link - http://beeline.ru/customers/products/mobile/, select the type of device to connect, for example - "On the phone", then select tariff plan, then click on "To connect" -> "Connection and service management" after which you can see information on how to connect the service, for example, by dialing the code - *115*04# or by calling the number.

Attention! Page addresses and USSD request codes are for example only and may change over time! To connect, go to the main page of your website mobile operator and already since home page go to the pages with information about connecting to the Internet. For other operators, the setting will be approximately the same. You can also call your mobile operator at hotline and activate the service verbally. Another option is to come to any operator’s sales office in your city, where sellers must activate the service.

2. To turn on the Internet, you need to go to "Settings" -> "Data transfer" and opposite the item "Mob. traffic" or check the enable checkbox, or move the switch to the right to "On". For most ZTE smartphones, this is enough to automatic start mobile internet. After the connection is established, depending on the type of connection, in the notification panel, next to the network signal strength icon, the symbol H (HSDPA), G (GPRS), E (Edge), R (Roaming) or 3G will appear. Also, to check the Internet connection, open the browser and wait for any web page to load, for example, by typing “ya.ru” (light version of Yandex) in the address bar.

Attention! If smartphone 2-SIM, then the SIM card that will be used to access the Internet must be inserted into the WCDMA / GSM connector, and in the settings "Settings" -> "More" -> " Mobile network» -> « Network settings SIM1″ (or 2 depending on the model, see the slot number under the cover) -> "Network mode" -> "Preferred network mode" -> "GSM / WCDMA" or only "WCDMA".

3. If the Internet does not appear on your ZTE device after following the previous recommendations, then you must either obtain the Internet settings from your mobile operator in automatic mode, or enter the settings manually.

Automatic setting

If the operator is Megafon, then go to the site - megafon.ru, click on the link "Support" -> "Settings", select "ZTE" there, and then your smartphone model, for example - "V880E" and enter your phone number. After that, the settings should come to your device.

If the operator is MTS, then go to the site mts.ru, then " Mobile Internet and TV" -> "Help and Service" -> "Settings" -> "Phone settings". There we enter the number and wait for the settings to be received.

If Beeline operator, then auto tuning mobile Internet is ordered by a free call to 0880. (The password for saving settings is 1234.)

Manual setting

If the operator is Megafon, then go to http://labs.megafon.ru/dev/, select “Other manufacturers” -> “ZTE”, look for your device, for example “ ZTE Nubia Z5″, well, we are trying to set it up as it is written there.

If the operator is Beeline, then go to the site beeline.ru, there click on the link "Help and support" -> "Internet settings" in the search field, enter the model of your device, for example - ZTE V790 and then click "Find instructions" and read the information on at a construction site. You can also send instructions directly to your phone by selecting the link "Send SMS with instructions for ZTE V790".

If the operator is MTS, then go to the site mts.ru, then "Mobile Internet and TV" -> "Help and Service" -> "Settings" -> "Phone Settings" -> "Internet" -> "Android", read the instructions .

General rules manual setting

Go to "Settings" -> "More" -> "Mobile network". If 2 Sim-cards are used, then select the settings of the Sim-card for which the Internet is activated. Next, click on the item "APN access points" -\u003e " New point access "and enter the settings that are indicated on the website of your mobile operator. After entering the settings, save the access point, reboot the device and rejoice.

In most cases, the following settings will suffice.

Setting up a ZTE router is one of the main steps in connecting to a network.

Moreover, regardless of which connection is used to access the network - wired or wireless - it will take a little time.

It does not affect the settings and models of routers - only the speed of Internet access and the way it is distributed to computers and other equipment depends on this characteristic.

Router selection

ZTE is one of the largest manufacturers of electronics, including routers.

And, although by far the most popular are wireless routers, receiving the Internet via wireless 3G and 4G channels, one of the best options universal models can become for purchase.

That is, such devices that can receive and transmit data using a cable, and in other ways (mobile communications, Wi-Fi).

The ZTE brand provides potential customers of its equipment with a wide range of different models that differ in functionality, speed of network access and data transfer.

All modern devices, even from the lowest price categories, provide wireless (Wi-Fi), and many even connect to the network in the same way.

Thus, even relatively cheap models meet the requirements of most users.

Although, as a rule, the higher the price of the router, the more features it provides - including a wide range and a clear signal.

One of the most important characteristics router is the number of antennas - the more there are, the greater the gain.

Even more convenient option is a router with the ability to connect additional amplifiers.

It is this technique that should be chosen for a large apartment and, moreover, for a private house, the territory of an entertainment center, a cafe or an office.

ZTE E5501

A popular router, released back in 2014, but still popular and sold online at a price of about 1000 rubles, is the ZTE E5501.

The advantage of the model is an attractive design (not so important, but still taken into account when buying a characteristic), support for 802.11n wireless technology and the presence of two antennas that amplify the signal by 10 dBi.

And a small drawback is the inability to connect a 3G modem and use other methods of connecting to mobile communications.

Rice. 1. A little outdated, but still quite functional and stylish ZTE E5501 router.

ZTE ZXHN H118N

More new model ZTE ZXHN H118N with a price of about 1000-1200 rubles. already has USB port for a modem that allows you to connect to the network using mobile technology.

At the same time, there is also a WAN connector for wired access.

And the data is transmitted to other devices located within the range of the router, both via cable (4 LAN ports) and via Wi-Fi.

Rice. 2. ZTE ZXHN H118N - for wireless and wired network access.

ZTE 5502

Another model, in terms of functionality and price (about 900 rubles), reminiscent of the E5501 router, also looks quite stylish.

However, it has practically no advantages over other devices - only wired access is possible, and the network is distributed only in one range (at a speed of about 300 Mbps).

Although the ZTE 5502 encrypts information quite reliably (using WPA-PSK, WPA2, etc. technologies).

Fig.3. Bright and functional router ZTE 5502.

ZTE MF283

The MF283 model is capable of receiving the Internet using both 3G and 4G technologies (connection via a SIM card), and with two wired connections at once.

In addition, you can connect a USB drive to the router to download information from the network directly without a computer, and a telephone cable.

And, therefore, such a router will be an excellent option for both a large house and an office.

Moreover, the antennas of the device are removable, and can be replaced by more powerful elements.

Rice. 4. Model MF283 - a router with replaceable antennas and connection to a mobile network.

ZTE MF28D

The router works great both with wired connections (broadband and telephone) and with a mobile network.

It is worth noting that wireless connection is provided not with the help of 3G / 4G modems, like most routers of this type, but due to the SIM card installed in it.

And up to 2 antennas can be connected to the device, each of which amplifies the signal by 3 dBi.

Rice. 5. Router MF28D - for working with 3G / 4G Internet and wired connection.

Preparing for setup

Before connecting a router of any selected type, you should first check its contents. The router should come with:

• power unit;
• Ethernet cable to connect to wired network(except for options for connecting to the Internet using mobile technologies only);
• instructions, warranty and software CD.

The network cable is connected to the WAN port (less often - ADSL, if the connection is made through the telephone network).

Another cord is installed with one side into the LAN connector on the same router (you can choose any port from LAN1 to LAN4), and the second one into the corresponding RJ45 slot on the network card of a computer or laptop.

Important: When connecting two networks from different providers to the router at once (for example, via WAN and mobile communications) it is also desirable to install a splitter to filter the signal. And you can increase the coverage with the help of additional antennas.

Rice. 6. Connecting the cable to the network card of the laptop.

After connecting all the cables, you can turn on the router using the button located on the back.

The next step is to check the connection using the indicators on the front panel of the ZTE router. Here you can see signals showing:

• to which connector the PC (laptop) is connected;
• Is the wireless connection working?
• whether there is a network connection.

If your device is connected to the Internet and a computer, and the wireless connection is working, you can continue to configure the router.

For this, a web interface is used, which is present on any Wi-Fi router.

And after setting up the device, you can use it without a computer - just turn it on to connect with any gadget, including tablets and smartphones.

Creating an Internet connection

Management of ZTE routers for wired and wireless connection is carried out using a special interface, to which you can connect by specifying an address like 192.168.1.1 in the browser (you can specify this value in the data sheet of the router).

If the device is already connected to the PC, after entering these numbers, a settings window appears on the screen where you need to:

Important: Most often, when connecting with a cable, the network is detected automatically. If this does not happen, you may need to update or install drivers network card. And then set up a new connection.

Now that Wi-Fi is enabled, you can set up the connection itself.

In the WAN Connection menu, PVC0 is selected in the Connection Name line, and Route is set in the Type line.

After that, you need to choose to enter the connection name and password (when connecting type PPPoE), which will be used to enter the network.

The ADSL network is configured in much the same way, although the transition is to a different tab.

Rice. 7. The process of connecting the router.

If the connection is made using a 3G / 4G connection, the setting is carried out through another tab - 3G WAN Connection.

Here, only the APN access point name is selected (you can find it on the provider's website or check with the company's technical support).

The rest of the settings are usually set automatically.

You should know: Depending on the model of the router, the names of the tabs may differ. For example, the access point name is sometimes required to be entered on a separate APN Settings tab. At the same time, all user actions will be approximately the same.

Additional sections

In addition to setting up a network connection, the user of the ZTE router has the ability to change other parameters:

• for example, in the Multi-SSID section, you can make the network both open and closed;
• the name of the connection is changed in the SSIDName column;
• the maximum number of simultaneously connected devices is set in the MaximumClients item (most models support up to 32 connections simultaneously);
• in the EnableSSID item, the network can be enabled or disabled;
• The HideSSID section allows you to hide the wireless network.

Rice. 8. Setting up the protection of the router.

If there is a Security section in the settings menu, where you can select a WPAPassphrase encryption key with a length of 8 to 32 characters.

As well as the Authentication encryption type and the appropriate WPAEncryptionAlgorithm information transfer protection algorithm.

When setting a password, you should be guided by a number of rules.

First of all, choose a combination consisting of at least 8 characters, including both lowercase and uppercase letters, as well as numbers.

In addition, it is undesirable to use the names and dates of birth of users as passwords.

Features of settings for different providers

Setting up ZTE routers is slightly different depending not only on the device model, but also on the service provider.

Among domestic providers, users most often choose the services of Rostelecom, Beeline and MGTS.

In addition to the fact that these operators have the maximum coverage of the territory of the country, a wide range of tariffs can be found in the list of their services.

When configuring a router to work with the Rostelecom network, you need to not only enable Wi-Fi operation(according to the standard method), but also perform the following steps:

For correct operation ZTE router, which should work in the MGTS or Beeline network, the same steps are performed as with standard setting connections.

That is, entering a password and login, activating Wi-Fi and setting the parameters of the Multi-SSID sections. At the same time, routers of this brand are no longer used for ADSL connections.

WiFi router ZTE E5502 overview of interface settings

Setting up a ZTE router is an important step in connecting to the Internet. detailed instructions setting up your router

If you don't see your router's IP address in the list above. There are two additional ways determining the IP address of your router:

1. You can also follow the How to Find Your Router Address guide.
2. Or you can use our free software called Router IP.

Now that you have internal IP address your router, we are ready to enter it.

Login to the ZTE router, through the web interface in a web browser

ZTE has a web interface for configuration. You can use any web browser you need to log in to ZTE. In this example, we will use Internet Explorer.

Enter ZTE internal IP address

Put your ZTE's internal IP address in the address bar of your web browser. It looks like this:

Then press the Enter key on your keyboard. A dialog box will appear asking for your username and ZTE password.

ZTE router password and default username

You need to know the username and password to login to ZTE. All default usernames and passwords for ZTE are listed below.

Enter your username and ZTE password in the dialog that appears.

Steps to Change WiFi Password for SLT ADSL - ZTE

1. Open a browser and type 192.168.1.1 and press Enter.

2. Then a pop-up window will open and ask you to enter your credentials. Enter the username as admin and password as admin and click the login button. (This is the default username and password for the SLT router configuration page, you can change it at any time after logging into the router configuration page)

3. The router configuration page will open and click menu INTERFACE SETUP, and then select Wireless(see image below).

4. Now go to lower part page to the WiFi password section and change the WiFi password.
Changing the Pre-Shared key will change the password of the WiFi router.

5. After entering your password, scroll down to the bottom of the page and click the Save button.

6. That's it. You have successfully changed your ZTE password.

Forgot ZTE router password? Need to reset the ZTE router

Have you changed the username and/or password of your ZTE router and forgot what you changed it to?
Do not worry: All ZTE routers come with a factory default password that you can reset to by following the instructions below.

Resetting your router to factory defaults is a serious step. However, sometimes when you have no other way to access your router, this step is necessary. In particular, if you can't log into your router normally (perhaps because you've forgotten your password), this may be your only resource. Before resetting the router to factory settings, make sure that the passwords do not work, including the default passwords.

Reset ZTE router to default, this will reset ZTE password to default

If you decide to return your ZTE router to factory default settings, you must perform a 30-30-30 reset as follows:

1. When your ZTE router is turned on, press and hold the reset button for 30 seconds.

2. While holding down the reset button, power off the router and hold the reset button for another 30 seconds.

3. While holding the reset button, power on the device again and hold for another 30 seconds.

Your ZTE router should now be reset to its new factory settings. Check the table to see what it is (Most likely No/No).
Important: don't forget to change the default username and password to increase the security of your router after a factory reset, since the default passwords are available all over the internet (for example, here).

I still can't access my ZTE with the default password

Make sure you follow the reset instructions correctly, as the router should always return to factory default settings (ZTE password and login) upon reset. Otherwise, there is always a risk of damage to your router and it may need to be repaired or replaced.

How to change the wireless channel on my wifi

Example. On performance wireless router may be affected by interference from other nearby routers. You can change the wireless channel to one with less interference.

Step 1. Open an internet browser (such as Internet Explorer) and enter http://dlinkrouter.local or http://192.168.0.1 into the address bar. Press Enter.

Step 2 Enter password for account administrator in the field. If you have not changed this default password, leave the field blank. Click Login.

Step 3: Move your cursor to the "Settings" tab and then click " Wireless connection» in the drop-down menu.

Step 4: Click " Additional settings" for the band for which you want to change the wireless channel. Select a channel from the drop-down menu " WiFi Channel». The mode selection process is the same for the 2.4GHz and 5GHz bands, but the options available for each band are different.

Band 2.4 GHz:

5 GHz band:

Note. In most cases, you only need to change the channel on your router. Most wireless adapters automatically detect the channel your wireless network is using.

Change LAN IP address on ZTE

If you followed our navigation guide above, you should see this screen.

We start this guide on home page ZTE router. Want to change your IP address? You have come to the right place. We'll show you how.

ZTE ZXA10 F660 is a home gateway module for optical network GPON. In other words, this is equipment that is installed directly at the client. In appearance, the ZTE 660 resembles a regular WI FI router. However, this impression is deceptive, since a lot of functions are combined in a small device.

The first difference from other client terminals is the use of modern xPON optical communication technologies. The second and no less important difference is versatility. Now, in addition to connecting four desktop computers or internal networks via Ethernet ports (RJ 45) and several clients via WI-FI, the ability to support flash USB drives 2.0 standard and IPTV support. There are also two POTS ports (RJ 11) that allow you to connect telephones and use IP-telephony in parallel with other functions without loss of communication quality. The terminal also boasts many other positive qualities, including environmental friendliness, constant updating software and full support by manufacturer representatives in many countries around the world.

Specifications and functions of ZTE 660

Terminal specifications:

User interfaces:

• RJ-11 (POTS) - 2 (designed to connect telephone sets and their further operation using IP-telephony).
• RJ-45 (Ethernet) - 4 (3x1 Gbps for connecting desktop computers + 1 IPTV for TVs).

SC/UPC (Optical interface) - 1:

• Fiber type - single-mode;
• Interface standard - ITU-T 984.x;
• The speed of receiving / transmitting information - 2.488 Gb / s / 1.244 Gb / s;
• Optical signal output power - from 0.5 dBm to 5 dBm;

The length of the fiber optic channel is up to 20 km.

USB - 1 (standard 2.0 is supported).

• frequency - 2.4 MHz;
• standards - IEEE802.11b and IEEE802.11g;
• function of manual and automatic selection of channels;
• signal strength change function;
• support for 4 SSID networks simultaneously (128 clients per network);
• WEP, WMM, WPS, WPA/WPA2PSK, WPA2PSK and WPA PSK encryption.

• Virtual local table computer network - 4000;
• MAC address table - 4000;
• Multicast table - 1000.

System startup time - 50 s.

Consumed voltage and power - 12V/11W.

Overall dimensions (width/height/depth) - 199mm/35mm/150mm.

Weight - 0.7 kg.

Equipment delivery set:

• terminal - 1;
• power adapter 12V - 1;
• patch cord - 1;
• instruction ZTE 660 - 1;

Terminal functions:

• GPON - Bandwidth allocation, GEM adaptation, T-CONT, Measurement of parameters and diagnostics of optical channels;
• WIFI;
• VoIP - technology for making telephone calls via the Internet;
• ETH Functions - ETH OAM, MAC Address Handling, VLAN Handling;
• Multicast data transmission;
• Data forwarding and routing at layer 3;
• IPv6 support - new protocol using 128 bit address length;
• Control functions;
• Security mechanisms - Data protection on the GPON interface, Traffic suppression;
• Energy saving in GPON system;
• Alarm;
• Maintain performance statistics for Ethernet ports.

Configuring ZTE 660

After installing the equipment in its place, it is necessary to carry out the procedure for setting it up. To do this, you will need to perform the following steps:

• Connect one end of the connecting cable (patch cord) to one of the four Ethernet ports, and the other to a computer or laptop;
• Open any browser (for example, Opera);
• In the address bar, enter the following inscription 192.168.1.1;
• In the window that opens, a sign should appear prompting you to enter a login and password to access the hardware settings. Enter “admin” in the “admin” fields and click on the “Login” button.

After checking the entered information, the browser will open a new window in which the equipment model will be indicated, serial number, chip and firmware version, ZTE 660 password.

To enable the hardware WI FI function, you must:

• Go to the "Network" tab located at the top of the open page;
• In the “Basic” window that opens, change the value in the “Wireless RF Mode” column to “Enabled”;

After completing this action, you must confirm it by clicking on the "Submit" button.

WI-FI network settings on the ZTE ZXA10 F660 router:

• Go to the "Network" tab located at the top of the open page;
• Next, in the side of the page, you need to click on the link "WLAN";
• Now you need to go to the "Multi-SSID" item.

Here you can change:

• Network ID name "SSID Name";
• Enable or disable the "Enable SSID" changeable network function and select it "Choose SSID";
• Hide its visibility "Hide SSID";
• Define the number of simultaneously connected GEM "Maximum Clients" ports (default is 32).

After making all the changes, confirm them by clicking on the "Submit" button.

To configure WI FI security in ZTE 660, you must:

• Go to the "Network" tab, which is located at the top of the open page.
• On the side of the page, click on the "WLAN" link.
• Next, go to the "Security" tab on the left side of the screen.
• In the "Choose SSID" field, select the network ID you need to change the settings.
• In the "Authentication Type" field, select the method to access your network: "Open System" - open system; Shared key - public key;
  "WPA-PSK", "WPA2-PSK", and "WPA-WPA2" are private key authentication types.
• In the "WPA Passphrase" field, enter your personal network access code.

Important! Here it is immediately worth saying that in order to protect against unauthorized entry, a reliable key should be created. To do this, it must simultaneously contain numbers and alphabetic characters of both the upper and lowercase(uppercase and lowercase), and the length of the code itself must be at least 10 characters.

In the "WPA Encryption Algorithm" field, select an algorithm for encrypting data on the network.

After making all the changes, confirm them and click on the "Submit" button.