How to make a landscape sheet in liber office. Title from new page

The accidental loss of a mobile becomes a real problem for its owner. The smartphone of a modern person stores a huge amount of necessary and simple important information- passwords, social media, correspondence, photos, applications of banking institutions and contacts. If the device has been lost, you should immediately start solving the issue of how to find a lost Android phone by imei. This is a unique opportunity to find a device using conventional satellite tracking, and it's completely free.

Before you find personal phone using this function, you will first need to know the IMEI of your mobile phone. To do this, look at the back of the battery built into the device. You can also dial the command * # 06 # and look in the warranty card or on the package.

Having learned this parameter, you will need to perform several actions aimed at finding the loss:

• A request is submitted to law enforcement agencies and documents are provided for the belonging smartphone.
• Employees of the organization submit special requests to all active cellular operators.
• Specialists, in turn, will search for the device in their databases. This is the best opportunity to find out who owns the SIM card that was previously installed on the lost device.
• All information received is sent to law enforcement agencies in order to conduct subsequent necessary proceedings.

Employees are not looking for a smartphone directly through Imey. They use this number solely for conducting a criminal case, to identify a person as the owner of a smartphone.

Via computer

To find out the coordinates of a lost device and quickly decide how to find Android by imei, you will need to use Internet services and software designed for the Android OS. You can track the device via the Internet only if the functionality is tied to Google profile. To achieve this goal, you will need to perform the following simple steps:

1. Goes to the account profile of this browser.
2. In the main section, you can find the Search option and immediately activate Proceed.
3. Selected desired device, then the approximate location of the phone will automatically be displayed.

By using similar service users are allowed the opportunity to see the place where it is located on this moment smartphone and where a person moves with it. This optimal opportunity will significantly increase the likelihood of finding the loss.

Via satellite online and free of charge

You can check via satellite and completely free of charge, you can through special programs. Their main feature is the ability to fix the serial code of the device and use it to track and resolve the issue of how to find lost phone Android via computer via imei.

There are a huge number of portals on the Internet offering such services, but many of them are fraudulent. A lost cell phone can be found through special appeals to the police, via satellite, as well as through the use of branded applications. Among the most important of these are free services, How:

To use them, it is enough to have a smartphone-communicator at your disposal, go through a simple registration and register your personal information. It's about about data such as mobile number, SIM card, address, full name. After entering such information, the search itself can be carried out directly. The desired result appears on the screen after a few seconds and you can easily find your Android device by imei.

Find Android by Name

If a personal smartphone has been stolen, it can be found online by IMEI. Despite the fact that there are no special services on the network that can show the location of the smartphone according to this indicator. The best way out here is to use special services that allow you to simply track using special devices and software.

Another option to get information about the device is to use an analogue of a personal Google account, that is google app Play, which you can find and install from the gallery. This program has a special remote control phone, clearing information and blocking all information. disadvantage this method is that when stealing, a fraudster can simply take full control of the installed application.

If this is confusing, you can use special software Lost Android. This is a more powerful application in its functionality, which can also be found and installed from Google Play. Among the main features that the user receives after installation are:

There are a lot of functions provided, thanks to which computer users do not have any particular problems with how to find a lost or stolen smartphone.

Summing up

Law enforcement officers are engaged in searching and tracking lost or stolen smartphones via Email. If the fact of theft is detected, you will need to contact the police and file a statement. The document must contain the code Have. After receiving an official request, employees will quickly forward the request to operators. Other necessary work. As a result, you can succeed in the process of searching for a stolen gadget by I have.

LibreOffice Writer is a program included in the LibreOffice package, which is gaining popularity every year. For most, this package has become a replacement for MS Office, especially it attracts business owners, since the software ( software) is completely free.

How to perform orientation change in LibreOffice Writer?

However, this is far from the only advantage of Libra - a responsive interface and wide functionality will help to solve any tasks assigned to the employee. The package, in addition to Writer, includes five more programs: spreadsheet editor Calc, Impress presentation tool, Draw vector editor, Math formula editor, and Base database management system. As you can see, there are programs for a variety of tasks.

However, let's focus on LibreOffice Writer, because working with text in electronic form has become an integral part of any workflow, from studying to working in the office. The program has a nice and responsive interface. A person who has not previously worked with text editors, quickly get used to it. Otherwise it's powerful word processor, which will allow you to perform all possible operations with text (typing, editing, etc.).

A common problem when using Writer is changing the orientation of the sheet. Sometimes it is necessary to change the portrait view we are used to to a landscape view in order to better present information, such as graphs or tables. There is nothing complicated in this procedure.

Go to the "Format" menu, then "Page". Next, in the "Paper Size" select landscape, click OK.

ATTENTION. Do not be afraid when you see an orientation called "Portrait" - this is the same book, only under a different name.

However, such settings will change the view throughout the document, if you need to apply landscape orientation only to some sheets, then follow the instructions below.

1. Go to menu "Format" - "Styles and Formatting".
2. Then click on Styles.
3. Now you need to create a new style, to do this, select "New" and go to the "Manage" tab, where you can enter a name for the style.
4. Go to the "Page" tab, check the box for Paper Size Landscape and click OK.

Typically, a single page orientation is set for the entire document. But in some cases, it is required to make one or more pages of a different orientation.

I suggest several ways to do this. As an initial condition, we accept the situation when two pages of landscape orientation must be inserted among portrait-oriented pages.

Along the way, the article answers the following questions:

• How to make title start with new page
• How to change page numbering
• How to insert a break
• How to remove a gap

Manual way

To change the page orientation, you must first insert Page break and set the page style that follows it.

1. Open the document and set the mouse cursor on the page behind the text. Those. if we have some text, then the cursor must be located behind it, otherwise the part of the text after the cursor will jump to the next page.
2. Because we need insert gap, therefore go to the tab "Insert → Break".
3. The "Insert break" dialog will open, in which we set the marker opposite "Page Break", and in the list "Style" choose "Landscape". Click "OK".

Album page inserted. A break is indicated by a blue bar above the page. Now press the Ctrl+Enter key combination on your keyboard. We will have another landscape page. Instead of a keyboard shortcut, you could insert a break again.

So that after landscape pages pages with portrait orientation again go, repeat steps 1-3, but only in the list "Style" choose "Base"(or the one you created).

There is nothing complicated. But you should keep in mind if you changed the page parameters outside the style (i.e. just through the dialog "Format → Page"), then most likely after inserting the style "Base" you will have pages with other parameters.

To avoid this, it is better to create the page style you need in advance or modify an existing page style to suit your requirements. You can read about what styles are and how to work with them.

false path

Many forums and blogs give an erroneous solution to this issue. There it is proposed to open the page settings dialog "Format → Page" and on the tab "Control" choose "Next Style".

This approach leads to confusion. This is a completely different function. Let's say you have a page with a style "Base" and this is the main style of all the pages in your document. Behind every page with style "Base" automatically followed by a page with the same style. If you ask him "Next Style", For example, "Landscape", then you will start alternating pages. Every time after page with style "Base" will automatically follow the page with the style "Landscape". As soon as you insert a base page after the landscape page, the landscape page will go after the base page again and this will happen every time.

Therefore, you shouldn't do that. To disrupt the normal flow of pages, a page break is used, since usually only one or two different pages need to be inserted.

Pager extension

There is a convenient Pager extension (http://myooo.ru/content/view/106/99/), which is used to quickly insert pages. Including, with its help, you can quickly change the orientation individual pages.

Page settings

Everything in LibreOffice is built around styles. Even if you don't explicitly apply them, you still use styles. Every page has its own style. The standard template defaults to a page with style "Base".

If you just go to tab "Format → Page" and change the page settings there, you don't change the style itself. You make changes only for a specific page. Therefore, if you need to change page settings, change the page style.

For more information on styles:

Don't be lazy to learn styles. In MS Office, too, everything is based on styles. Large documents cannot be properly formatted without their use.

Title from new page

With a page break, you can, for example, make all chapter titles automatically start on a new page.

To do this in the header style on the tab "Position on the page" you need to ask "Tears". It is possible not to specify a specific page style, in which case the page style used throughout the document will be applied.

Change page numbering

Using page breaks and page styles, you can change the numbering of the next page, for example, the 3rd page can immediately be followed by the 8th. This also uses the insert break dialog.

Removing a gap

To delete a break, just place the cursor in front of the break and press the Backspace key on the keyboard.

And again about logic

Again, I want to talk about logic. I keep saying that the LibreOffice interface is very logical. But sometimes logic requires certain knowledge.

It is quite logical to try to change the page orientation using the dialog "Page settings" ("Format → Page"). However, it cannot achieve the desired result, as it changes the settings for all pages in the document.

Programs can't read people's minds. Conveniently, the portrait page is automatically followed by a portrait page as well. Indeed, in most cases, a separate document is drawn up in a single style. It would be extremely inconvenient to tell the program which page to follow each time. But even in this case, a mechanism has been devised with "Page Break".

However, the page break is a paragraph parameter. Not everyone can follow this logic. The fact is that programs such as LibreOffice operate on paragraphs. A paragraph is primary, without a paragraph there is no page. Neither LibreOffice nor MS Office can create a completely blank page. There will always be a blinking cursor on the new page and will be automatically made empty line. Yes, an empty line is also a paragraph.

Programs that are used to create printed products (Scribus, Inkscape, CorelDraw, Illustrator and the like) on the contrary operate on pages. For them, the primary page on which you can place images, text blocks, etc.

Therefore, in LibreOffice, a page break is a paragraph attribute. Take a look at the picture below.

Paragraphs are marked with blue marks. By making a page break, we kind of tell the program that the next paragraph should start on a new page.

So, the logic is still present, but to understand it, you need to know the basics.

Breaks in Microsoft Office

IN Microsoft Office The page break is a special character. inserted from the menu "Insert → Break" or by inserting a special character with code 012.

In Libre/Open Office, a page break is a property of a paragraph.

Page settings include paper size, page orientation, and margins. In this case, all parameters are determined using page styles. By default, a new text document uses the Normal page style for all pages. How to set document page orientation

3. In the Page style: style name window, on the Page tab, in the Orientation group, activate the desired item: Portrait or Landscape.

4. Close the window with the OK button. How to set the paper size and size

1. In the window open document open the Format menu.

2. In the command list, select Page.

3. In the Page style: style name window, on the Page tab, in the Paper size group, expand the list of the Format column and select standard format paper. The default size is A4.

4. For a custom paper size, use the Width and Height sliders to set desired values.

5. Close the window with the OK button. How to set the background of the pages of the entire document

3. In the left part of the Options window, expand the OpenOffice.org list and select Appearance.

4. In the right part of the window, in the Color settings group, open the Document background column and select the desired color.

The default color is Automatic, which is white.

5. Close the window with the OK button. How to set document margins Page margins are the space left between the edge of the page and the text field.

1. In an open document window, expand the Format menu.

2. In the command list, select Page.

3. In the Page Style: style name window, on the Page tab, in the Margins group, set the required margins with the Left/Inside, Right/Outside, Bottom, and Top controls.

For standard official documents (letters, orders, etc.), as a rule, the following margins are used: top and bottom - 1.7 cm, left - 2.5 cm, right - 1.5 cm. Maximum margins: 2 cm, left - 3 cm.

4. When working with two-sided documents, it is recommended to switch to mirror margins (so that the left and right automatically change places on even and odd pages). To do this, in the Layout settings group, expand the list of the Page layout column and select the Mirror item.

5. To display only odd (right) pages in the program window, select Right Only. Even pages will be displayed as blank pages.

6. To display even (left) pages only, select Left Only. Odd pages will be displayed as blank pages.

7. Close the window with the OK button. How to set visible text borders For better orientation on the page, margin lines can be displayed as conditional non-printing lines.

1. In an open document window, expand the View menu.

2. In the command list, select Text Borders. How to set the color of the fields

1. In an open document window, expand the Tools menu.

2. In the command list, select Options.

3. On the left side of the Options window, open the OpenOffice.org list and select Appearance.

4. In the right part of the window, in the Color settings group, expand the list of the Text borders column and select the desired color.

The default color is Automatic, which corresponds to gray.

5. Close the window with the OK button. How to set the display of a grid in a text field A grid (in the form of horizontal and vertical rows of dots) allows you to set the exact position of various objects on the page.

1. In an open document window, expand the Tools menu.

2. In the command list, select Options.

3. On the left side of the Options window, open the OpenOffice.org Writer list and select Grid.

4. In the right part of the window, activate the Show grid item.

5. In the Resolution and Grid spacing groups, set the required parameters if necessary.

6. Close the window with the OK button.

All page properties for Writer text documents, such as page orientation, are defined using page styles. By default, a new text document uses the Default page style for all pages. By the time the existing text document different pages might already have different page styles applied.

Note that changes to page properties only affect pages with the current page style. The current page style is displayed in the status bar at the bottom of the window.

content

Change page orientation for all pages

If the text document only consists of pages with the same page style, you can change the page properties directly:

1. Select Format - Page.
2. Open a tab Page.
3. In point Paper size
4. Click the button OK.

Change page orientation for only some pages

Page styles are used to determine page orientation in LibreOffice documents. With page styles, you can define many page properties, such as the top and footer or fields. In addition, for current document You can change the default page style or define your own page styles and apply these styles to any piece of text.

At the end of this help page is detailed information about page styles. For getting additional information see the section at the end of the page for the concept of page style.

To change the page orientation for all pages with the same style, first create the corresponding page style, and then apply that style:

1. Choose a team.
2. Click icon Page styles.
3. Click a page style right click mouse and select New. The new page style initially gets all the properties of the selected page style.
4. On the tab Control enter a name for the page style in the field Name, for example, "My landscape orientation".
5. In field next style select the page style you want to apply to the page that follows the page with the new style. See the section on applying page styles at the end of this help page.
6. Open a tab Page.
7. In point Paper size select “Portrait” or “Landscape”.
8. Click the button OK.

An appropriate page style has now been defined, named "My Landscape". To apply the new style, double-click the My Landscape page style in the window Styles and Formatting. All pages in the current page style area are changed. Selecting a different style as "next style" only changes the first page of the current page style area.== Page style area ==

The Page Styles area in LibreOffice must be known. Which pages of a text document are affected by editing the page style?

Single Page Styles

A page style can only be applied to one page. As an example, consider the “First Page” style. To set this property, define a different page style as the "next style" on the tab.

A single-page style starts at the bottom of the current page style range and is applied until the next page break. The next page break appears automatically when the text moves to the next page, sometimes referred to as a "soft page break". Alternatively, you can insert a page break manually.

To manually insert a page break at the cursor position, press CTRL+ENTER or select Insert - Gap and just click the "OK" button.

Selecting where to apply a page style manually

The “Default” page style does not include the selection of the “next style” on the tab Format - Page - Control. Instead, "next style" is also defined as the "Default" style. All page styles that are followed by the same page style can apply to multiple pages. The lower and upper bounds of the page style range are defined using "page breaks with style". All pages between any two "styled page breaks" have the same page style applied.

You can insert a "page break with style" directly at the cursor position. Alternatively, you can apply the page break with style property to a paragraph or paragraph style.

Run any of the following commands:

• To insert a "page break with style" at the cursor position, select Insert - Gap, then select a name from the list Style and click the "OK" button.
• To apply the page break with style property to the current paragraph, select Format - Paragraph - Text Placement Activate And With page style
• To apply the page break with style property to the current paragraph style, right-click the current paragraph. IN context menu select Edit paragraph style. Open a tab On the page. In the Breaks area, select Activate And With page style. Select a page style name from the list.
• To apply the "page break with style" property to a custom paragraph style, select Format - Styles and Formatting. Click icon Paragraph styles. Right-click the name of the paragraph style you want to change and choose Change. Open a tab On the page. In the Breaks area, select Activate And With page style. Select a page style name from the list.