How to activate a new sim card beeline on the phone. SIM card Beeline does not work on the phone - reasons and what to do? Activation of a blocked SIM card Beeline

After purchasing a new SIM card, the first thing to do is to activate it. If the subscriber bought it at the branch of the mobile operator, then you can immediately contact the manager and ask him to activate the SIM card. But it's easy to do it yourself, you just need to know the instructions.

Beeline SIM card activation on mobile

Numbers intended for calls in case of problems with activation:

• - from a cell phone;
• - from urban;
• +74959748888 - while staying abroad. Calls from Beeline numbers are free.

The activation process itself consists of several sequential steps, during which you need to:

1. Set sim to cellular telephone, then enable it;
2. If necessary, enter the pin code that is under the protection layer on the SIM card holder. If the pin is entered by mistake several times in a row, to restore it, you need to use the puk code, also located on the plastic retainer.
3. Make sure your cell phone is within network coverage.
4. Call back to any number or send SMS;
5. When replenishing the balance for the first time, the SIM card can be activated automatically.

To make the SIM card active, you can also use a special combination *101*1111# , after dialing which click on the call. After these steps, you will receive an SMS with information that the SIM is activated.

To verify activation, you need to dial *102# and click on the call. If the card is active, the account information will appear on the screen.

Beeline SIM card activation after blocking

There are several ways to activate a blocked SIM card, the choice of which depends on the circumstances under which it was blocked.

Beeline SIM card activation on a tablet

1. Install a SIM card in the device;
2. After the download occurs, you need to turn off the transmission of information over cellular communications;
3. Choose a special combination 101*1111# , and then click on the call;
4. To control activation, you should use the request code *102# , after dialing which click on the call. If the card is valid, the requested information will appear on the screen.

If the tablet device does not provide the ability to make calls and send command codes, then you can remove the SIM card and move it to the phone, and then follow the steps above. With Wi-Fi connected, the card can be activated in your Beeline account (

Articles and Lifehacks

If you plan to access the Network from a modem, then you should know how to activate the Beeline modem, otherwise you will not have access to the Internet.

How is the number activated

• Activate number. To do this, you can use the combination indicated on the envelope to the SIM card or ask a specialist to activate for you.
• If you purchased the SIM card separately from the modem, then you should write certain commands into it. To do this, you will need to contact the operator at 0611 or visit the nearest Beeline communication salon.

How the modem is configured

1. Connect the modem to a PC or laptop. But before that, you need to insert a SIM card into the modem slot.
2. The modem is connected to the PC by inserting into the USB port.
3. Make sure there are no heavy furniture near the computer, otherwise the modem signal will be weak. It is better to use open space or be near a window to access the Internet.
4. After the modem is connected, automatic installation drivers. You should wait for some time until the installation process is completed.
5. After installing the drivers, you will see the message Run AutoRun.exe. Click on it, then select the folder where the files will be placed, wait for the installation to finish.
6. After you launch the modem window, you will need to activate the balance.
7. The application window should now appear in front of you.
8. Check the signal level in the program, if it is low, try to change the place where you are now.
9. If there is no signal, it may be a faulty SIM card or a bad connection.
10. You can go to the Settings section, where you specify the language, get acquainted with the information about the program, and also select the network in which the modem will work.
11. Click the Connect button to connect to the Internet.

When a consumer switches to the service of a particular provider, he receives new sim ku. Without it, it is impossible - voice communication, SMS correspondence and data transfer. But first you need to register in the operator's network. But how to do it yourself? In the article we will help you deal with this issue and consider proven ways to activate a Beeline SIM card.

How to launch a Beeline SIM card in different ways

If you are going to purchase a new SIM card and conclude a service agreement with Beeline, you will need to activate it. To do this, there are several simple methods for self-configuration.

Via USSD command

The sequence of actions for activation:

1. Usually, SIM cards are sold in special starter kit packages.
2. Open it and take out a small plastic business card, a new card is inserted into it. On it is indicated helpful information for user: bound phone number and security codes.
3. Initially, it is recommended to purchase a SIM of the required size and shape in accordance with the mobile device. Currently, they are produced in various formats.
4. Insert the SIM card into a special slot in the phone design and turn it on.
5. After that, the system will ask you to specify a personal PIN key, which is supplied in the accompanying documentation. If you enter it incorrectly in the amount of three times, then an automatic blocking will occur. To resume work, you will need to dial the PUK code, ten attempts are given to install it. If the password is written incorrectly, the SIM card is irretrievably out of service.
6. Wait while the equipment finds the operator's network.
7. Enter the USSD code in the call menu - *101*1111# .
8. Now the smartphone is ready for full operation.

According to the provider, the procedure can be greatly simplified. Insert a SIM card and request the balance status by command *102# . But this method is more latest versions cards.

In personal account

You can activate the starting balance using the provider's official website and personal account. To do this, turn on the device and go to the link "Beeline.ru". After that, you will be greeted by a pop-up window that will offer to register the card in the system. Here you can choose any tariff plan or connect Additional services from the operator Beeline.

Contacting technical support

If for some reason you are unable to carry out the procedure yourself, call the provider's service assistance number - "0611". At any time, a qualified specialist will answer you. Ask him to remotely transfer the SIM card to the active state. You can also ask him for reliable information about interesting offers and options.

When buying equipment, you can, without leaving the cash desk, ask the manager or seller to register the card on the Beeline network. Or, at any time, approach the nearest customer service department with a passport with the same question.

On a tablet

If you are the owner of a tablet, then the procedure is not much different from a mobile device. Enter USSD command*101*1111# or use the assistance of specialists in the salon or call technical support.

On iPad models registration procedure is slightly different. Open the device settings section and the cellular data tab, then select SIM programs. In the menu that appears, click on "My Beeline" and "Other Services". This is followed by the “SIM card activation” tab, in the corresponding window, confirm the actions and wait for a response from the provider.

For modem

If you want to use mobile internet via a desktop computer, then purchase a USB modem. To activate, follow these steps:

1. Insert the SIM card into the USB router and connect it to the computer port.
2. Install software usually happens automatically.
3. Log in to the app and select the account management section.
4. Click on the recharge tab.
5. After that, click on the start balance activation button.
6. Translate cash on a SIM card and feel free to use the Internet.

You can try the methods described for mobile phones.

Possible reasons why activation does not occur

But not always everything goes smoothly, in some situations an error may occur during registration. What could be the reasons:

1. If the protective PIN keys and PUK, then the SIM is permanently blocked.
2. Possible defects and malfunction of the card itself. To check this, paste it into another mobile device and repeat the steps above.
3. You entered the code combination incorrectly, try entering it again.
4. If the phone does not see a new SIM card, then there may be a problem in the hardware. Damaged connector, antenna device, or incorrect SIM format and size selected. Sometimes subscribers independently adjust and cut SIM cards according to desired form, which can lead to a violation of the contact area.
5. Your smartphone may be in airplane mode, which blocks data and basic cellular functions.

In case of any malfunctions and problems, please contact Beeline technical support "0611". If necessary, they will replace the damaged card or help you set up the equipment.

The choice of a mobile operator is carried out by the client himself, the consumer of the service. In modern conditions, almost all cellular operators offer similar tariff plans. But a lot depends on the signal level in a particular area. For this reason, some users choose Beeline and activate the SIM card precisely given operator. How to do it?

There are several ways to activate a Beeline SIM card on a tablet that has a slot for installing and using it.

Activation via mobile phone

The best way to activate the SIM card that you plan to use to access the Internet is to install it in an existing mobile phone - in the appropriate slot - and then activate it.

After downloading the gadget, you should dial the command - * 101 * 1111 #. This USSD request will automatically activate the SIM card. Latest Models SIM cards do not require such a request at all: it is enough for the user to check the balance of his account using the *102# command.

If the SIM card is not activated, then the best way to achieve what you want will be an appeal to the Beeline technical support service (call 88007000611 or short number 0611).

Tablet activation

When the tablet is turned off, the SIM card is installed in a special slot. Activation can be done in the following ways:

1. via USSD command *101*1111#;
2. by entering the URL beeline.ru in the address bar of the browser and updating the “Start using” option;
3. through the online help of the contact center (call to the indicated numbers).

A tablet with an iPad platform requires a special SIM card activation procedure. To do this, you need to enter the following sequential options: "Settings" - "Cellular data" - "SIM programs" - "My beeline" - "Other services" - "SIM card activation" - "Ok". After that, activation will take place.

Activation using the communication salon

The easiest way to activate a Beeline SIM card is to visit a mobile phone salon. To do this, it is advisable to take your tablet with you and trust a specialist who will remove all questions with the activation of the SIM card. This method is more laborious, as it requires time and certain physical effort. That's why this method is suitable, first of all, for those users who do not even have elementary knowledge in the field of modern information technologies.

Choosing the optimal tariff

The final chord of the SIM card activation process is the choice of the most optimal tariff plan and suitable options. This can be done through the "Personal Account", as well as through special service teams, a list of which is on the Beeline official website. Here the preference is given to:

1. volume of traffic;
2. data transfer rates;
3. price segment.

It's no secret that in order to fully use the capabilities of cellular communication, a new SIM card needs to be activated. This rule is mandatory for all mobile operators and Beeline is no exception. As a rule, the SIM card is activated by the seller immediately after its purchase, but this does not always happen. If during the process of purchasing a SIM card the seller did not help you with its activation, you will have to complete this procedure yourself.

If you do not know how to activate a Beeline SIM card, just read the instructions below. The editors of the site have collected in one article all the currently existing methods of activating a Beeline SIM card, but you just have to read the article and choose the most convenient option for yourself.

• Brief information:

To activate the SIM card of the Beeline operator from your phone or tablet, use the USSD command *101*1111# .

How to activate a Beeline SIM card from a phone, tablet or USB modem

The Beeline operator is well aware that not only phone holders, but also owners use its services. tablet computers and USB modems, which may also need to activate a SIM card. Therefore, the operator has provided the ability to activate a SIM card from any of the listed devices. Of course, you can simply insert a new SIM card into your phone first, activate it, and then install it, for example, into a modem. This option is not entirely convenient, so below we have given ways to activate a Beeline SIM card from any device.

• Attention

Exists universal way SIM card activation. Insert the SIM card into your phone, tablet or modem. Then open a browser and enter the address beeline.ru. Immediately after that, a page will open where you can click on the “Start using” button.

Beeline SIM card activation from phone

Most often, the Beeline SIM card is used in mobile phones, therefore, it makes sense first of all to consider ways to activate a SIM card using a phone.

You can activate a SIM card from your phone in one of the following ways:

1. USSD command. The simplest and convenient way Beeline SIM card activation involves the use of a special command. Dial the command * 111 * 1111 # on your phone . Immediately after this, the SIM card will be activated and you can start using cellular communication in full.
2. call to contact center. In rare cases, the above command does not work. In such a situation, the problem can be solved. Before you activate the Beeline SIM card through the contact center, you need to find another mobile or call from the city. The fact is that being in an inactive state, the SIM card allows you to call only the number emergency service 112. If the call to the operator is made from a Beeline number, use the number 0611 . For city phones and numbers of other operators, the number 8 800 700 06 11 is provided . After connecting with the operator, tell him about your problem and he will help you solve the problem.
3. Beeline office. If none of the above methods suits you, then you can use the most reliable one. Contact the nearest Beeline communication salon and ask for help with sim card activation. Such assistance is provided free of charge, the main thing is to take your passport with you.

Activating a SIM card from a tablet

Speaking about how to activate a Beeline SIM card on a tablet, it should be noted that all of the above methods will be relevant in this case as well.

You can activate the SIM card on your tablet in the following ways:

• USSD command * 111 * 1111 # ;
• Entering the address beeline.ru in the browser and clicking on the "Start using" button;
• Calling the contact center from another phone;
• Visiting the Beeline communication salon.

Separate instructions should be given for iPad holders. To activate a Beeline SIM card on an iPad go to the main menu in "Settings", then in the "Cellular data" section, select "SIM programs". Next, you need to open the "My Beeline" section, then select "Other Services". Now click on "Activate SIM card" and in the window that opens, click "OK". After completing these steps, the SIM card will be activated on the iPad.

• Attention

To check if the SIM card activation was successful, simply use the *102# command. If you managed to get information about the balance, then the SIM card is in an active state.

Activating a SIM card on a USB modem

Beeline USB modems also provide ways to activate a SIM card. First of all, you need to install the modem management program. To do this, simply insert a USB modem into a computer or laptop and allow the software to be installed. Next, in the modem management program, open the “Account Management” section, then click on “Account Replenishment” and go to the “Starting Balance Activation” subsection. After that, you can access the Internet.


You can also use the universal way to activate a SIM card. Open a browser and enter the address beeline.ru. In principle, you can enter any address, as you will be redirected to the Beeline website anyway. In the page that opens, you just need to click on the "Start using" button.

Activation of a blocked SIM card Beeline

The process of activating the starting balance, that is, the new SIM card, was described above. If you are interested in how to activate a Beeline SIM card that has been blocked, then you will need another instruction. About that, we wrote a separate article, so here we will consider only the main points.

• Important

• If the blocking was caused by repeated incorrect input of the pin code (3 times), and then the puk code (10 times), then the SIM card cannot be restored.

You can activate a blocked SIM card beeline in one of the following ways:

• By calling 8 800 700 06 11 (only if the SIM was blocked by you voluntarily through the same number);
• Via (if logged into Personal Area you can’t use a blocked SIM card, use any other, the main thing is to remember the password);
• Through help desk Beeline (call the operator and report your problem);
• Through the Beeline communication salon (universal method suitable for all situations);
• If the reason for the blocking is a large debt, then simply topping up the balance is enough to solve the problem.

This is where we will end this article. Now you know how to activate a Beeline SIM card. All of the above options are working and taken by us from the official Beeline website. If you have any questions, ask them in the comments.