How to make it so when you turn it on. How to disable Skype loading when you turn on your computer

Automatic launch of a particular program when the computer boots is a convenient function, and it is worth using it if available basic set apps that you always keep open. Some programs have their own settings in which you can set them to launch automatically every time you start Windows; others do not have similar functionality, but this allows you to do this operating system. In this article we will look at how to disable startup programs using Windows and, if necessary, enable automatic start individual applications.

Starting with Windows 7, the standard “Task Manager” of the operating system has a lot of useful functions and serves not only to terminate frozen programs and diagnose the load on computer components. In particular, the “Startup” item has appeared in the “Task Manager”, which displays all programs that automatically start when Windows boots. To get to this point, call the task manager by pressing the Ctrl+Alt+Del keys and select the “Startup” tab at the top of the window that opens.

To disable startup of an application in Windows through the Task Manager, you need to click on a specific program in the list right click mouse and select “Disable”.

Note that Task Manager also shows the impact specific application on the operating system startup speed. You cannot add new programs to the Task Manager. automatic download when the computer starts.

How to enable or disable autorun of programs through the registry

The registry allows you to access almost any function of the operating system. In particular, through it you can configure a list of programs that are automatically loaded when Windows starts. To do this, you need:

1. Press the combination on the keyboard Win keys dows+R and write the command regedit;
2. Next in the registry, go to the following path:

It should be noted that according to the instructions above, program startup parameters are set for the user on whose behalf this moment The registry is being edited. If you want to set parameters for all users, in the left side of the registry editing window, right-click on the Run folder and select “Go to the HKEY_LOCAL_MACHINE section.” After that, follow the procedures to add or remove a program from the startup list.

You can enable autoloading of individual applications through a special folder. It is enough to place a program shortcut in it so that it automatically starts every time Windows boots. To go to this folder, just press the Windows + R key combination on your keyboard and enter the command in the “Run” window shell:startup.

It should be noted that this folder does not contain all programs that are set to start automatically when the operating system starts. You cannot disable system applications through it.

This problem, when the Internet does not turn on automatically when the computer starts, only affects those users who connect to the World Wide Web using a modem. Since constantly connecting the Internet manually gets boring over time, it is advisable to configure everything so that the connection occurs automatically.

First of all, you need to set the name of the Internet connection to English language. In the control panel, select “Network and Internet”, then “Network connections”. If the connection has not yet been created, then you need to do this; if it already exists, then you should rename the already created connection. The name can be given, for example, VPN.
Then you need to run the scheduling function Windows tasks. To do this, launch the “Control Panel”, and then select “System and Security”, “Administrative Tools” and “Task Scheduler”.

Then you need to create a task through the “Action” item. First you need to enter any name and description of the task and click “Next”. At the next stage, you need to choose an option when to connect the connection. You can choose "When the computer starts" or "When you log on to Windows." On the next “Action” tab, select “Run task”.

Then, in the “Program or script” field, you need to specify the program built into Windows, which is used to work with network connections - C:/Windows/system32/rasdial.exe. And in the “Add arguments” field you must enter a command in the following form: *connection name* *login* *password*. For example, Beeline VasyaP 12345.

Finally, you need to check the box “Open properties for this task...” and click "Done". The network settings window will open. VPN connections, where you need to check the boxes “Run for all users” and “Run with pending rules” and click “OK”. Now every time you turn on your computer/laptop network connection will happen automatically.

An alternative way to automatically connect to the Internet

Can also be customized automatic connection Internet using the program autorun function. First you need to create a BAT file. Open notepad and fill it with the following text:
cd %systemroot%\system32
start rasdial VPN VasyaP 12345.

It is clear that you need to enter your own network name, login and password. After this, you need to save the document in Notepad and rename the file to VPN_auto.bat. If file permissions are not displayed, you can enable them through Explorer by selecting “Tools” - “Folder Options” - “View”.

Then you need to copy this file to the path C:/ProgramData/Microsoft/Windows/Start Menu/Programs/StartUp. You will need to restart your computer, after which the Internet should connect automatically.

If your task is to speed up loading Windows, and this must be done without using third party programs, then you definitely need to read this article. Since it contains simple, and most importantly effective ways speed up operating room loading Windows systems 7, the impact of which you can feel without a stopwatch.

When starting any computer, the first thing it does is launch the BIOS (from English Basic Input/Output System - Basic system I/O), and therefore you need to start speeding up Windows startup with it. In BIOS(e) we are interested in two things: the boot priority queue, and the Fast boot function.
The latter can significantly speed up system startup by canceling the search and checking of the BIOS(s) of connected devices. However, this function has its drawbacks - by disabling it, the user disables the use of devices connected via non-standard connectors (USB, S-Video, hosts for mobile devices). They will start working after Windows has fully started.

To speed up booting by configuring the BIOS, you must:

Important! The picture shows the "Boot Queue" for a Dell Inspiron laptop. It may vary slightly on other devices. As a rule, the differences concern only the visual component, while the names of bookmarks and commands are almost always identical (standardized) for all devices.

It should also be noted that Fast boot sometimes works too well. As a result, users do not physically have time to press the required button in time to re-enter the BIOS. This problem can be solved by pressing the opening button BIOS settings(a) before turning on the computer.

Second step

The next step to speed up booting refers to connecting all processor cores (if there are more than one) to start the operating system. For this:

The manipulations performed will begin to work the next time the operating system is rebooted.

Step three

The next step is to turn off unnecessary programs and services that affect system startup.

Disabling services

Here it is necessary to disable unnecessary services, since they load the system even if they are not used by the user. Especially when Windows startup. You can read in detail about what can be disabled and what is better left untouched on the Internet, however, you can guess about some services yourself. For example, you don’t need Print Manager if you don’t have a printer.

The “service” is turned off by right-clicking on it and clicking “Properties”. After which a window will open, where in the “Startup type” column select “Disabled”.

Step four

Next, we configure what Windows programs should automatically start when the system starts. Since so many programs like to be registered in autorun, the user not only does not use them, he does not even suspect that they are running.

Setting up Windows 7 startup

The changes you make will take effect the next time you start the operating system.

Step five

The last point to speed up the system startup is organizing busy with files space on the hard drive, in other words – defragmentation hard drive. This procedure is reminiscent of organizing the arrangement of books in a library. What is required to make it more convenient, quick search books (in our case files) and their use.

The disk defragmentation service in Windows 7 is launched by a separate command - defrag.exe. It must be entered into the search bar of the Start menu or in the Run window (Win + R).

By running this command, you will open the “Defragmentation” window, where you should select the disk on which the operating system is installed and start defragmenting it.

The defragmentation process may take a large number of time, sometimes several hours.

Also in this window, it is better to immediately enable the function of periodically running defragmentation by clicking “Set up schedule”.

And choosing the optimal launch parameters for you. After this you can start defragmentation of hard disk.

Advice. You should not boot your computer during defragmentation; it is best to leave it until the process is finished.

If you regularly visit sites with dubious content or download any programs from there, you can be sure that sooner or later your computer will become infected with malicious software. software. One day it may happen that after restarting your PC, you will find that the browser has automatically opened along with it, and it immediately opens an incomprehensible link or advertisement. This means that you have become a victim of malware and, naturally, you need to fight it so that your confidential data does not “go away” to someone else.

The essence of the problem

Most often, this happens due to the user’s carelessness and the lack of effective security measures on the computer. While surfing the web, each of us can become a victim. malware , and it is not always possible to determine them independently. Most often, they “hide” under the guise of harmless or even useful programs that we download and run. As a result, after launching the executable file, the malicious code , which can be written to the system registry, browser settings and startup. Of course, such programs do not show any appearance for the time being, but immediately after restart On your personal computer, you will see that your browser has also opened, and with it a page with advertising or an unknown search engine. In any case, you need to fight this scourge, since there is a high probability that your confidential data may be compromised (attackers can steal passwords, logins, data bank cards

, names, etc.).

Reasons for appearance The reason for this problem is simple. Most likely, you downloaded from global network some program, game or application and launched installation package . and this has more to do with gaining the trust of the user. Many malicious programs are designed in such a way that their code can only be executed manually. In this case, when we run the installation package, we automatically generate malicious code that can be written in those places on the computer where it is needed. Depending on the attacker’s goals, these could be: browser settings, system registry, computer startup settings, even PC hardware (RAM).

As for the browser that automatically opens with the computer, most often, in this way, attackers try to increase their own profits by moving the user to advertisers’ sites. On the global network, many services are built on the principle that payment is made by visiting certain pages and by what more quantity visits, the greater the profit. It also increases the conversion of the site, its indicators for advertisers, and accordingly increases its price. You shouldn’t assume that such software is absolutely safe, because you don’t know what the attacker has planned and implemented in his code. It may have added a feature to automatically send user data. In any case, this problem needs to be dealt with.

What to do when, when you turn on your computer, a browser with a website or advertisement automatically opens

This problem is gaining momentum today, and this is largely due to the fact that antiviruses do not yet recognize this as malware. Of course, you can call a master, but then you will have to pay a good amount for minor work. Therefore, try to do everything yourself, especially since the removal procedure itself usually does not take much time. You can cope with this task in literally one hour.

Cleaning startup

So, first of all, you will need to check your startup settings. Perhaps one of your browsers is located there and therefore starts along with personal computer. In order to clean “Startup”, you need to do the following:

These manipulations will not be enough; after a reboot, most likely, the ill-fated window will appear again. Don't worry - everything is going according to plan, and the next step is to clean the registry.

Cleaning the registry on your computer

To begin, restart your PC again and when the browser starts, pay your attention to the address bar, namely, to the name of the site that launches first (before the redirect). The thing is that it is the name of the first site that we need. If you don’t have time, then immediately after loading you will be transferred to another one, then restart your PC again and repeat the procedure. By the way, so as not to look in a hurry or reboot your desktop computer, you can simply disconnect it from the Internet network. In this case, the browser will open again, but redirection will not occur, and you will see the site that we need. Next, you have to work with the registry itself:

To make sure you are not mistaken about what you are deleting, take a look at the “Value” item in the table provided. Pay attention to the address and if the site name you are looking for is indicated there, then feel free to click on the “Delete” button. Repeat the search until the search phrase no longer appears in the results.

For simplicity, you can use special software that analyzes and cleans system registry. For example, use CCleaner program or AdwCleaner. They are quite easy to use, so no one should have any problems working with them. Let's look at an example of how CCleaner works:

If nothing has changed after rebooting, then you should check your computer with an antivirus.

Antivirus scan

Like any other malware, it also leaves traces, although it successfully masks them. In some cases, files or folders may be found that again and again restore deleted data in the registry. The best thing to do is use your antivirus and check your computer. Let's look at the example of Kaspersky Virus Removal Tool:

After a reboot, the device may begin rescanning. As a rule, it lasts a little longer, but also shows better results. If other advertising files are found, repeat the removal procedure.

Removing a page from the browser

Often, malware stores information about itself in the browser settings. It is for this reason that when you launch, an unnecessary page of some search engine or third-party site may appear. All this information can be deleted and returned to its previous form with your own hands, and you don’t have to worry that you will somehow manage to harm your computer.

First of all, you will need to work with the browser shortcut, since sites often register themselves in the properties. To do this you should:

Pay attention to the “Object” field, if there is something else listed there after Application\chrome.exe Additional Information, then feel free to delete it. Also pay attention to the section " a shared folder", where after the word Application there should also be no values. For best result do the following:

After this, most likely, when you start the PC, the browser will no longer be activated, but some data from the embedded code may still remain. You can only get rid of them if you manually change the settings inside the web browsers themselves.

If you use Yandex.Browser:

If you are using Google Chrome:

If you are using the Opera web browser:

If you are using Internet browser Explorer: