Tips for flashing Windows Phone to Android. How to flash a Windows smartphone: step-by-step instructions Main files that are present in the firmware program

BIOS firmware This is not a labor-intensive process and will take a little time. It is recommended to install a new version and only from the manufacturer if the previous one was observed incorrect work. Let's look at the question in this article: how to update the BIOS on Windows computer 10.

Checking the firmware version

Check current version Firmware can be installed in several ways:

1. By looking at the information on the motherboard itself or on the remaining packaging. Look for a similar inscription rev 1.0, rev 1.1, rev 1.3.
2. On the Windows operating system. Open the Run command (Win+R) and enter the command msinfo32

   In the “System Information” window that opens, look at the “BIOS Version” element.
   

3. In the very BIOS menu(check out the article:) in Main or at the bottom of the screen.
   

Where can I download?

BIOS installation files can be downloaded from the official websites of motherboard developers or from the websites of laptop manufacturers (for example Dell, Lenovo, HP, Acer) in the “Download” section.

	asus.com
	msi.com

Update instructions

There are several ways to flash the BIOS.

On Windows

To update, download the required firmware to your computer. Then use proprietary utility from the motherboard manufacturer:

If the downloaded file is executable (extension .exe), run it and wait for the installation to complete (the manufacturer writes about this in the firmware instructions, for example Dell).

Advice! The update is carried out on all Windows versions 10, 8, 7, XP.

In BIOS

Most modern motherboards support a version upgrade method in the BIOS environment. For firmware download installation file to a flash drive and connect to your PC. Use the utility in motherboards to install BIOS:

In DOS

To update the BIOS using DOS environment, you need to create bootable USB flash drive with DOS and the BIOS itself. In addition, you may need a utility for the update process (Gigabite use DOS Flash utility). The update must contain a file with a .bat extension (Update.bat or Autoexec.bat) to run the firmware in DOS. This method is becoming obsolete and is applied to older models of motherboards.

Do you have any questions regarding your computer's firmware? Ask about it in the comments or use .

Many users are wondering how to reflash Windows Phone, which is often associated with system failures or the need to switch to another OS. It is possible to flash a smartphone or tablet running Windows OS on Android, but you will certainly encounter certain difficulties.

First, you will need to download the Rom version of Android, a USB cable to connect to a PC, and Root rights on the gadget that you will be flashing. In addition, there is a special emulator program with which you can work with applications in the "apk" format. And if you are a fan of the Android interface, then you can download the corresponding launcher for free, which fully replicates the style of icons and many of the system’s functions. Now let's figure it out how to flash Windows Phone to Android and what difficulties you may encounter on the path to success.

Flashing Windows Phone to Android

Now technology has come so far that a modern phone is actually not inferior in its capabilities to a desktop computer and may even have additional functionality. Standard software is loaded by the manufacturer, but unfortunately it does not always suit users, and therefore the question becomes relevant how to flash Windows Phone to Android on one's own? If you wish, you can even install another operating system by downloading the appropriate firmware. But we recommend that you do it first backup copy system, so that if something happens, you can restore the functionality of the device. To do this, you can use the standard functionality of the device or use a third-party application.

We would recommend the Titanium Backap program. If something goes wrong during the firmware installation or you want to return to the previous version of the system, then a copy will cope with this task. Reflash Windows Phone 10 You can do it yourself, but it is important to act in full compliance with our instructions, otherwise you risk getting a brick.

Why is it so important to back up your data?

During firmware flashing, all data stored in the device memory is erased. Using a copy, they can be restored to an already flashed phone. This way you will save your photos, videos, pictures, documents and other files. To make sure you have backups, you need to go to the phone settings section and look at the “Backups” tab.

Question how to reflash windows phone Phone sometimes it encounters certain difficulties, because there are many models on this operating system, but in general the method of flashing them is the same. You have two options: install Android on the device’s USB flash drive or run the installation file directly from the Windows OS, installing it into the device’s memory.

Running Android OS on a Windows Phone flash drive

Users have questions every now and then Is it possible to reflash Windows Phone? and fortunately the answer to it will be positive. If you want the new OS to be accessible from a flash drive, you will need to copy everything system folders Android to one of the root folders of the flash drive. The folder can be arbitrary. It is important to pay attention to the default.txt file as well as its contents. It contains all the data necessary for the normal startup of the system.

When you enable the Haret.exe file, the device reloads the operating system using the settings of the default.txt file. Even if the OS is copied to a memory card, you will be able to use native Windows only after restoring your smartphone from a backup. It will return to the point where you created the backup file. Using this method installation, the device may reboot.

Instructions for flashing Windows Phone firmware on Android

Now you know Is it possible to reflash Android to Windows Phone? and how to do it correctly.

Let's talk about flashing Windows phone, this operating system itself is not so popular compared to Android and iOS, but the firmware process is much simpler and does not require special knowledge and skills. Perhaps even a beginner can cope with the firmware. Next, we will look at the advantages of firmware and the process of flashing a Windows phone.

Behind he needs a flashing

First of all, flashing may be necessary for some large-scale software problems, for example, if the smartphone freezes during an update and even the treasured combination “volume down button + lock” (+ camera button, possibly with the memory card removed from the smartphone) cannot save you from this. In addition, flashing the firmware will be useful if you updated to Windows 10 Technical Preview, but wanted to return to the native firmware due to a damp update.

Before flashing the firmware, if the smartphone is working, do not forget to back up your important data so that you can then restore photos, videos, applications, achievements and settings, including Notification Center and desktop settings, on the already flashed device. You can check the availability of backups and make a new one by going to “Settings” -> “Backup”.

How to flash Windows Phone

Regardless of the model that needs to be flashed, to upload the firmware to a Windows Phone smartphone you will need one single program installed on your computer. Download any additional files you won't need it. Everything you need for your model, Windows program Phone Recovery Tool downloads itself. You will only need to click on a special button and wait a few minutes until the flashing process is completed.

• You can download WP Recovery Tool from the Microsoft website at go.microsoft.com/fwlink/?linkid=522381. The program (at the time of writing this post) weighs just over two megabytes and is extremely easy to install.
• After launching, the utility will first check for new versions and then greet you with a window asking you to connect your smartphone to your computer. WP Recovery Tool does not work with all Winphones, so if your model is not on the list of supported ones, you will immediately know about it as soon as you connect the device to your PC.
• If the phone is not detected, you can try clicking the appropriate link in the program window, and then the utility will try to find a solution.
• Also make sure that your smartphone has installed the necessary drivers on your computer. If the drivers are installed, but the smartphone is still not detected, reboot it without disconnecting it from the computer. Sometimes the reboot process provokes the installation of additional software.

In our case, the device was successfully detected:

• Click on the tile with the name of the identified phone. The program will scan the model for important data and start the download process from official servers current firmware.
• The size of the firmware can exceed a gigabyte, so you may have to be patient. If the download suddenly stops halfway, do not be upset, because when you reconnect to the Internet and even after restarting the computer, the download will continue from the same point where it stopped last time.
• In the future, if you need to reflash the Winphone again, you won’t have to download the firmware for it again, because it is automatically saved in one of the folders on your PC.
• When the program finishes downloading the firmware, an active “Reinstall software” button will appear in its window. This means that the smartphone is ready for firmware. Make sure your USB connection is secure before clicking Reinstall Software.

The smartphone will turn off and the software reinstallation process will begin.

During the firmware process, it is forbidden to disconnect the smartphone from the computer, forcefully turn on the smartphone, or press any buttons on it. WP Recovery Tool itself warns about this, among other things. The whole process will take a few minutes. Once the process is complete, the phone will turn on on its own, but keep in mind that the first startup will take a little longer than usual.

Now all you have to do is activate and configure your smartphone, as you once did when buying it in a store. Connect to WiFi networks when the smartphone prompts you to do this, and log in to your account Microsoft entry. After this, the system will check if you have backups and, if any, will offer to restore from them. Select an available copy, click “Forward” and wait until the Winphone takes the form you saw it before flashing. You also have the right not to restore the backup, but to start working with the phone again.

Flashing your phone is sometimes the only option to restore its stable operation without having to contact service center or to private masters.

Let’s say your smartphone starts to freeze, won’t turn on, doesn’t respond to commands, can’t update, can’t find the network, etc. In such cases, it is not necessary to immediately contact specialists; you can first try rebooting, resetting settings, or extreme case reflash it with the official one Windows utility Device Recovery Tool.

If you are looking for information on how to flash your Nokia, Microsoft Lumiya or any other smartphone on your own at home Windows based Phone and Windows 10 Mobile, then this instruction will help you with this.

Firmware for smartphone on Windows Phone 8, 8.1, 10 via computer

Important! Before you start flashing your device, make a backup copy of your data, as all files and documents will be deleted. After the procedure, you will receive a completely clean phone. How to backup data via Windows interface 10 Mobile read. You can simply transfer all the files to your computer.

What is required for the firmware

1. PC or laptop with installed Windows 7, 8, 8.1, 10;
2. Working USB cable and port;
3. Firmware program;
4. The victim itself, whose battery must be charged at least 50% (preferably fully).

Download and install Windows Device Recovery Tool

This program is specially created for updating smartphone software. You can download it for free from the official Microsoft website at.

1. Download the installation file;
2. Install the utility;
3. We launch it and connect the phone to the computer.

Step-by-step flashing process

Important! Before you begin, keep in mind that you cannot turn off the device during the procedure. It is also prohibited to close the program, turn off the computer, etc. Otherwise, instead of a smartphone, you will get a lifeless brick.

So, we launched the program and connected the smartphone. The following window will open:

Click on the image with the device, after which we see information about available version firmware. Select "Reinstall software".

Click “Continue”.

In the next window, you can leave nothing marked and select “Continue without filling.”

and then installing it.

After some time, the phone’s firmware will be completed, click “Finish”.

In this simple and official way, we updated the software of our smartphone. After this, the device will reboot several times and you will need to configure it before the first launch.

First launch after flashing

After the smartphone starts, you need to select a language and continue setting up by accepting the terms of use.

In the next step, you can select the type of settings - recommended or custom. If the latter, then I advise you to uncheck all the boxes except the first two and last two points. After this, you need to configure the region and time: set the country, time zone, exact date and time.

This method firmware is suitable for all phones (for example, models 520, 535 Dual Sim, 800, 920, 710, 610, 925, 620, 914, 630, 510, 525, 1020, 620, 625, 635, 820, 900, 830, 430 , 435, 1520, 930, 640 XL, 550, 735, etc.).

This utility can also flash Windows phones from other manufacturers, such as LG, BLU, Alcatel, Acer, HTC (One M8 and 8X), VAIO, UniStrong, HP.

If you have Nokia and it does not work on Windows Phone, then for firmware there is a program called Nokia Software Recovery Tool, which you can download from

Many owners of mobile devices running the Windows Phone operating system dream of the capabilities of Andoid smartphones. After all, significantly more applications and games are available under the “robot”. Also, on Android you can easily install custom (custom) firmware and, in general, flexibly customize personalization. You can solve the problem by installing special launchers or utilities. In this article you will not find the answer to the question of how to install Android on Windows Phone. We will only look at and show you how you can install applications from the Playmarket.

One of the disadvantages of the Windows Phone operating system and, as a result, Microsoft smartphones is the small number of programs in the company store. As a result of this, users simply do not have the opportunity to play many cool games and use applications available for Android. Especially for devices under Windows control 10 mobile, the APK Deployment utility has been created. By following the instructions below, smartphone owners Nokia Lumia They can easily install their favorite Android application on their mobile phone:

• Download archive APK programs Deployment.
• Connect your mobile phone to your computer using a USB cable.
• Launch developer mode on your phone. To do this, you need to enter the main settings, select Update and Security / For Developers.
• Extract the downloaded archive with the utility to any convenient directory.
• Install the IpOverInstaller.msi and vcredist_x86.exe files.
• Open the executable file APKDeployment.exe, located in the folder with the unpacked program.
• Enter the PIN code that appears on the screen mobile device in the Key to pair field.

Utility for installing Android applications

After that you can try to download any apk file to your computer, preferably from a trusted source, and drag them into the APKDeployment utility window. You need to confirm the installation of the selected utility or game by clicking the Deploy All button. You can install selected programs from the list by selecting them separately using the Deploy button. Now all that remains is to find installed programs on your tablet or phone and try to launch them. If everything is done correctly, then you can now enjoy your favorite Android programs and games on your device.
You can see the utility's capabilities in more detail in the training video below.

Personalization

Especially for those who are not happy with some aspects of the Windows Phone operating system, the developers have released a special launcher. You can download KitKat Launcher to install it on Nokia Lumia in the Microsoft brand store. When launched, the program opens in full screen mode, allowing you to interact with the programs with the basic functions of your mobile device.
The main features of the launcher include the following:

• A large number of new icons and widgets.
• Ability to change the design of the desktop and main menu tabs.
• Quick launch of programs.

It is worth noting that KitKat Launcher is not a full-fledged Android operating system, but is intended only for superficial personalization changes. You can evaluate what this utility is like from the screenshots below.

Difficulties in installing Android OS on WP

You can find sites on the Internet that tell you how to flash your smartphone to the operating system. Android system. There are even custom (custom) firmware with latest version OS for Lumia smartphones 520 and 525 s detailed instructions on installation. But it should be noted that performing such an operation is strictly not recommended for several reasons:

• In smartphones and tablets running Windows Phone OS, the Bootloader is closed.
• There are no necessary drivers for all modules and sensors (camera, wi-fi, bluetooth, etc.).
• It is impossible to make a backup and return the Windows Phone OS back.

Also, such a procedure will lead to a violation of the possibility of warranty service and all consequences for it will not lie on the shoulders of the user. Therefore, instead of changing the firmware, it is better to install a special launcher from under the “robot”. See what the latest Android 7.1 nougat OS looks like at Nokia smartphone Lumia 520, you can see it in the video below.