iOS: Download free firmware for iPhone, iPod touch and iPad of all versions, changes in the latest version of iOS. IOS: Download free firmware for iPhone, iPod touch and iPad of all versions, changes in the latest version of iOS iPhone 4 android how to flash a modem

More recently, the famous Canadian iOS programmer, known under the nickname iH8Sn0w until version 2.9.9. This application will be very useful for owners of locked to the operator Apple smartphones, because Only with help you can get it on iPhone 4 and iPhone 3GS with subsequent unlocking.

The main feature of this tool is the creation of custom iOS 6.1 firmware with jailbreak without upgrading the modem and with the possibility of activation (hackactivation).

The disadvantages include working only in the operating room Windows system and support only for older devices such as iPhone 3GS and iPhone 4.

Why do you need custom firmware without upgrading the modem?

The fact is that when updating (restoring) an iPhone 3GS or iPhone 4 (and any other iPhone) on official firmware, along with updating iOS itself, the firmware version of the modem, which is responsible for unlocking the smartphone, is often updated.

For example, if you are locked to iPhone operator 3GS with the legendary modem version from the iPad - 06.15.00 (or any other), then when updating to the official iOS 6.1 firmware, at best you will receive a “software” (fixable) brick, but if your iPhone 3GS was released after October 2011 , then there is a huge chance of getting a “hardware” brick, which can only be restored by replacing the so-called modem part “flash drive”. This pleasure is not cheap; the cost of replacing a flash drive ranges from $30 to $80.

From my own observations, I can say with 99.9% confidence that you will not experience a hardware failure of the modem part (flash drive) on an iPhone 3GS with 16 or 32 GB of memory. These models were no longer produced until October 2011. But with the iPhone 3GS 8 GB version you need to be more careful, I repeat that when iPhone update 3GS 8GB, released after October 2011 with official firmware - there is a huge probability of failure of the modem part of the smartphone.

The first signs of failure of the modem part are the absence of Settings values IMEI, Bluetooth, WiFi. If the problem is caused by updating (restoring) to the official firmware, then on iPhone 3GS 16 and 32GB this can be cured programmatically, but not always on iPhone 3GS 8GB. I take this opportunity to invite you (pah-pah-pah, of course) to our "Apple-repair" — .

And so, the custom iOS 6.1 firmware obtained with the help provides the opportunity to restore any iPhone 3GS or iPhone 4 locked to an operator WITHOUT updating (upgrading) the modem firmware version. Those. in this case, ONLY the iOS version is upgraded, and the modem version remains unchanged. This allows you to easily unlock an iPhone 3GS or iPhone 4 running iOS 6.1 using a utility or turbo SIM cards (Gevey, Rebel, etc.)

Custom iOS 6.1 firmware for locked iPhone 4 and iPhone 3GS. Instructions for creation.

Before following these instructions, be sure to read them to the very end.

1. Download IPSW file official iOS 6.1 firmware and .

2. Open and click the white arrow in the blue square in the lower right corner of the application window. In the window that opens, select "Browse for an IPSW" and specify the official iOS 6.1 firmware downloaded in clause 1.

3. If you are creating a custom for iPhone 3GS, then in the next window you will be asked to indicate the bootrom version. Select "New-Bootrom / I don't know", which means that you are not aware of the bootrom version. :)

4. Make sure that the firmware has successfully passed identification. A message like this should appear: (Your firmware version) IPSW Verified! See screenshot. Click on the white arrow.

5. Select Expert Mode. Click on the arrow to continue.

6. Select an item General.

7. In this window you can add a function for the custom iOS 6.1 being created. Check the box Activation The iPhone(Hacktivate) if you have NO SIM cards of the operator to which your iPhone 3GS or iPhone 4 is locked. And NOT Check this box if you have EAT A SIM card from your “native” operator is available. Click on the arrow.

8. Click on the button "Buid IPSW" to create a custom iOS 6.1 firmware file for iPhone 4 or iPhone 3GS. Click on the arrow.

9. will begin creating custom iOS 6.1 firmware with jailbreak, about which the application will notify you with a message "Done" and offering donations to hackers from who created the custom built into the received one.

The custom iOS 6.1 firmware you created will appear on your computer desktop.

Click OK.

10. In order to restore to the custom iOS 6.1 received and not get it in iTunes error 16xx, you need to transfer your iPhone to special mode recovery - . Follow the onscreen instructions:

— press the Power button and the Home button at the same time for 10-12 seconds.
- after 10-12 seconds, release the Power button, but continue to hold the Home button until a green creeping line appears on the screen.

All! In front of you is an iPhone in PWNED DFU(black screen). will inform you about this.

Custom firmware with iOS 6.1 jailbreak for iPhone 3GS or iPhone 4. Installation instructions.

1. Launch iTunes. The application should detect your iPhone in recovery mode (PWNED DFU). Press and hold on the keyboard Shift and at the same time click the Restore button in the iTunes window.

2. Specify the IPSW file of the received custom iOS 6.1 firmware for iPhone 3GS or iPhone 4 in the window and click "Open".

The installation process will begin. Do not touch your iPhone during recovery. Wait. This may take 10-15 minutes.

ATTENTION!

— If at the end of the recovery your iPhone is in Recovery Mode (iTunes icon and cable on the screen), then the utility, which you can download, will help you get out of it. Launch iReb and go to the tab Recovery Mode Loop Fixer/SHSH Blobs Grabber.

Click on the button Set Auto-Boot True (Fixes 1015 Errors / Recovery Loops).

— it was noticed that an iPhone 3GS or iPhone 4 with custom firmware installed is NOT detected in iTunes. Unfortunately, we don't have a solution yet. However, for synchronization, we recommend using third-party applications similar to iTunes, such as iTools or iFunBox.

Congratulations, you have received an iPhone 3GS or iPhone 4 with iOS 6.1 jailbroken.

Firmware update for iPhone 4S involves the process of restoring its functionality. However, you need to know that all data will be lost during this operation. To do this, before performing the firmware, you should perform backup copy(provided that the iPhone is in working condition).

Before carrying out operational steps to flash the iPhone 4s, you need to download the firmware file using the extension - ipsw. The type of firmware will depend on certain version apparatus. To find the appropriate firmware version for iPhones, the files will indicate all available versions, as well as device models.

In the process of choosing the appropriate firmware option, it happens that the models are difficult to find, which is due to the presence of modifications - CDMA, GSM iPhones. This is precisely what is a very important point when selecting required model. When choosing a certain type of model, you will need to find a site to download the firmware. You should select the appropriate option and, if the choice is correct, carry out the OS download process. You can also select a new version of IOS, or download the old firmware that was previously available. The main condition is that the old version is signed by Apple.

The next step is to turn off the “Find iPhone” mode. This condition necessary to ensure a successful iPhone 4s flashing process, as enabled options may prevent this from happening. You should check availability new version iTunes. In this case, they launch the program and if a new version is available, this will be notified via iTunes and then it will be possible to update automatically.

After all the measures taken, you can proceed to the flashing process itself.

How to flash iPhone 4s

There are several ways to flash the iPhone 4s: through DFU mode and the second option is Recovery Mode. The second method is an emergency recovery mode and is intended for restoring the optimal performance of a device on IOS, in cases where the device stops operating under normal conditions. In DFU mode, all operational actions are carried out in addition to the iPhone OS and flashing directly through firware. This method suitable for those who own a device with Jailbreak, as well as in cases where it is not possible to carry out this operation with Recovery help Mode.

Flashing process using Recovery Mode:

• at the very beginning, you should turn off the iPhone and connect it to the computer (Home function), it will also recognize the device in the recovery Recovery mode Mode;
• launch iTunes and wait for the search result;
• here two options may arise - through iTunes you will be offered to restore the device (then you need to select the function - OK) and without the participation of iTunes. You will need to click on the iPhone image symbol and search for the function - “ iPhone recovery»;
• after that, you will need to press Shift key(OC Windows), or Alt key(OC Mac). After this, you should select the firmware plan through the “File Manager”;
• among the files, find a pre-downloaded type of suitable file. Then select it and click “Open”.

Next, iTunes will carry out all the necessary actions on its own. After this, you should disconnect the device from the computer (click on the “Power” function and turn off the device). The device turns on by quickly pressing the “Power” function. This way, the device will be completely fixed and ready for use.

Flashing via DFU mode:

• at the very beginning we switch to DFU mode;
• connect the device to the computer and disconnect the device;
• with simultaneous pressing of the keys - “Home”, “Power” and count about ten seconds. Then you should release the “Power” button, and at the same time hold down “Home” until software system iTunes will not recognize an iPhone in DFU mode.

The order of operations in the recovery process is similar to Recovery Mode. This method effective for those who have Jailbreak installed or the operation had no effect through Recovery Mode.

Flashing is performed when the new software program crashes very often with the presence of additional options and when the owner of the device changes. In such cases, this operation will need to be carried out with the built-in modem, as a result of which it will be blocked. The blockage is removed after the firmware is installed.

Flashing iPhone, iPod Touch via iTunes

After the restoration process, the iPhone 4s is configured by default, like a new device. You should select the previously downloaded IPSW file. IN Apple for iPhone, iPad, iPod Touch, software called iOS. Flashing an IOS device is a recovery process or software update the device, which consists of resetting the settings to the original (factory) level, with the simultaneous installation of an updated version of IOS. Restoration and update have one distinctive feature, which is that personal data is saved (during update).

There is an option to reset your iPhone, removing content, without the need to update the iOS version, and without losing Jailbreak. Upon completion of the update process, there is a chance to receive a device with iOS programs, with completely saved user content and all settings.

Very important point: It is prohibited to update a device with Jailbreak, as this may lead to the iPhone 4s loading forever. To begin with, you should proceed to download the file with the required firmware version.

Features of flashing an iPhone

When these problems arise with the device, it forces you to make a choice - perform a number of necessary actions yourself or take it to a service center? It should be noted that carrying out repairs in a workshop will cost quite a decent amount of money. In this case, you can try flashing the firmware at home, especially since this operation It is not particularly difficult and even an inexperienced person can do it.

How to flash an iPhone yourself if it is working? It is necessary to carry out direct connection to a personal computer in order to create a backup copy, since the settings during the operation will be permanently deleted. Then, it is advisable to copy personal photographs, videos, audio materials to HDD. When carrying out all the necessary measures, you need to know that despite the modifications of iPhones - 3, 4c, 5c, this procedure is identical for all devices. Taking this into account, you should not worry about the presence of some inconsistencies in the instructions regarding a certain brand of device. The most important condition is the exact and step-by-step implementation of all recommendations. Before you begin the firmware process yourself, you should study in detail the instructions for carrying out these activities, which will be the key to success in the process of restoring the functionality of the gadget.

Today, the iPhone occupies a leading position in the global market in terms of sales. mobile devices. This is due to the presence large quantity technical capabilities, various functional features and maintenance, with the provision of a wide variety of services. These devices are distinguished by very excellent quality and durability during operation. But over a certain period of time, the normal functioning of the device may cease and some errors may occur. Sometimes situations arise when the iPhone starts to reboot on its own or problems arise when Last update or new operating system, turn out to be unsuccessful.

The flashing process will provide working condition all functions of the device, thanks to which it will be able to serve for a very long time.

IPhone is a reliable device that can please its owners for a long time. The build quality and software make the phones from this company the undisputed leaders on the market.

After some time of use, some users think about possible firmware of this device. The term “firmware” refers to the installation of software on a gadget. Sometimes this is required to eliminate any system errors. Repair work in specialized service centers are quite expensive, and not every owner is willing to pay for it. The second reason for the possible flashing of the device is the installation of software not provided by the manufacturer.
Don't forget that firmware can also help if your phone is locked and you can't remember the password.
When reselling a device, it is also recommended to carry out this procedure to completely delete your data and phone.

Do you need special programs to flash an iPhone?

There are several types IPhone firmware depending on the goals and the desired end result:

• Recovery. It is important to remember that flashing a device’s firmware always involves complete deletion of data. Therefore, when starting the process, you need to make sure that all important data is saved.
• Update. In this case, the latest version of the software is installed on the device. In this case, all user information is stored in full

Important. IPhone does not allow you to install more old version Software than installed. The transition from beta to general version is also blocked.

For the standard iPhone firmware, the company has developed special program called itunes. It allows you to update, restore and change software. This is the main method recommended by the manufacturer. However, if you just need to update the software, you can use the tools integrated into the phone itself. This requires a stable high-speed Internet connection and a little time.

Flashing iPhone via iTunes

The standard program for flashing iPhone firmware is iTunes. To do this, first of all you need to install the program on Personal Computer. It's important that she howls latest version release. This method is officially recommended by the manufacturer.
To carry out the firmware, you should perform the following steps:

• Using a special cable, you need to connect your phone to your PC.
• After launching the program, select the device management page. To do this, you need to activate the button in the form of a phone
• Hold down the “Shift” key and click on the “restore iPhone” button. If you are using a MAC computer, you should hold down "Alt"
• In the window that opens, you should find the file responsible for the firmware. In order to distinguish it from the rest, you should remember that its extension is “IPSW”. In case of an incorrectly selected file, the program will display an error
• If everything is selected correctly, iTunes will ask you to confirm your actions. You need to activate the "refresh" button
• All further processes are carried out automatically and are regulated by a program that will remove software that has become unnecessary and install the required

Is your iPhone locked? How to flash in this case

The iPhone has fairly strong protection for its owner's data. Set password can turn a device into a useless piece of metal in the wrong hands. But what to do if the owner has forgotten his password and cannot get into the device?
The most incorrect way is to repeatedly enter the password, since after the fifth attempt the device is locked. The attempt can be repeated only after 1 minute. After the 7th attempt you will have to wait 5 minutes. In the end, the device will simply turn off and it will no longer be possible to enter the password.
There are three ways to solve the problem:

• Using iTunes
• Using iCloud. To do this, you need to go to iCloud.com. There you will need to enter your Apple ID in a special field. By following a simple algorithm of actions you can return your phone to a working state
• Through recovery mode. To do this, you need to connect your device to iTunes and simultaneously hold down the “lock” and “home” buttons. After a while, the iTunes icon will appear, and a window will appear on the screen allowing you to launch the recovery program

How to flash a Chinese iPhone if it is on Android

A real iPhone is a very expensive device that not everyone can buy. Chinese companies have released an analog phone that runs on Android. Naturally, the owners of such devices are also interested in its firmware.
To do this, first of all, you need to download the firmware version that matches the copy on which the process will be performed. To start the installation process, the FlashTool program is used.

Are there ways to flash an iPhone without iTunes?

In some cases iTunes installation inconvenient and sometimes even impossible. What to do in such cases? Jailbroken gadgets also have particular difficulties.
There are several ways alternative firmware devices:

• Via wifi
• Using RecoveryMode
• Via DFU Mode

Via wifi

If the phone is connected to high-speed Internet, then you can use the tools implemented in the gadget itself. They allow you to flash the firmware directly, without the use of any additional devices.
This feature is available from iOS 5 and higher.
To do this, you need to connect the gadget to wifi by clicking the corresponding icon. Next, in the “settings” menu, go to the “basic” section.
There is a “software update” tab. The program itself will tell you what actions need to be performed to successfully complete the process.

Using RecoveryMode

RecoveryMode is an emergency system recovery method. It is usually used if the phone for some reason is unable to turn on or work in standard mode.

Via DFU Mode

This method allows you to bypass standard means phone. His operating system does not participate in the firmware process. In this case, all actions are performed using Firmware. Most often, this method is recommended for those who have a jailbreak installed on their phone.

How to flash an iPhone 4s yourself: video

Methods to flash or return an iPhone without the help of others. In order to start flashing your iPhone, you first need to download the firmware. Need to know that

Home page » How to Reflash iPhone 4s Without iTunes

Methods to flash or return an iPhone without the help of others.

In order to start flashing your iPhone, you first need to download the firmware. You need to know that any phone model has firmware with its own extension. It’s not at all difficult to find out what specific firmware is needed for your model. On the back of the device, under the iPhone logo, the phone model is written, which is displayed as an alphanumeric set of characters.

Http://sase.bekal.ru/%D0%9F%D0%B5%D1%80%D0%B5%D0%BF%D1%80.

The whole difficulty lies in choosing GSM and CDMA models. Their difference is in working with different cellular networks. After determining the iPhone model, you need to find a website where you can download the necessary software. You can download both old and new versions, the main thing is that the downloaded version has a company subscription.

Before starting work, you need to disable the “Find iPhone” function on your phone. When enabled, the function will refuse flashing and display an error. You must have the latest version of iTunes. These three steps will lead to the start of the firmware itself.

Flashing can be performed using 2 methods: through RecoveryMode and DFUmode. In turn, RecoveryMode is an emergency mode that allows you to return the functioning of iOS gadgets if it refuses to work in normal mode. DFUmode differs from the previous method in that the operation is carried out bypassing the iPhone OS, the phone is flashed directly through the firmware

Firmware via Recovery Mod.

You need to turn off the phone and connect it to the PC, while pressing the Home button

Launch iTunes If the program prompts you to Return the iPhone, click OK, if it does not respond, then on the “phone” icon you need to click “Restore iPhone” while holding down the Shift button. In the file manager that appears, you need to select the firmware that was downloaded previously.

Then the program itself performs all the necessary operations. After the flashing is completed, you need to disconnect the phone from the computer and turn it on. The accessory is turned on with a quick press Power buttons The iPhone is ready to use.

Flashing iPhone without iTunes

Read also

How to remove and reinsert the laptop keys Shift, Space, etc. Let's look at how to insert and replace the Caps lock, Shift, Ctrl and Space keys on two different keyboards. The first keyboard is similar to HP or Asus. The second is one from the options...




Tip 1: How to access the web from an iPhone How to access the web from an iPhone What is a modern mobile phone How to use an iPhone for a modem Tip 3.5: Disabling the web on an iPhone Mobile data (aka cellular data/cellular data) and this Mobile Internet on your...




Questions and answers in the field of it technologies and PC setupHow to get into the BIOS on Lenovo laptop- several common methods A laptop is a very important tool for doing work and relaxing. It allows you to perform complex operations, find information...




Today, many different devices are being produced that significantly expand the functionality of phones. Increased attention should be directed to fitness bracelets, which are extremely popular among athletes and people who simply live intensively...




3 proven methods to remove graphic key on a Sony phone I forgot the pattern of the graphic key on a Sony Xperia phone I don’t know what to do - about 15,000 people knock on the Internet with this question within a month. Usually there’s a problem with unlocking...



Batteries for Nokia phones Almost all of us have had a Nokia phone. Many people probably have one at home that isn't used, but you can give it to your child so he or she always knows where it is. Nokia phones leaving the station...

Flashing iPhone without iTunes

Firmware for iPhone 4 without iTunes

Firmware Iphone 4 without iTunes %

We use DFU Mode.

Before the operation, you need to transfer your iPhone to DFU mode Mode To do this, the accessory is connected to the PC and the iPhone is turned off. You need to immediately hold down two buttons: Home and Power for 10 seconds. After 10 seconds, release the Power button, continue to hold the second button - the phone should find the iPhone in DFU mode.

Let's launch iTunes; We find the “return” window by immediately pressing the Shift button. A window will open where you need to select the previously downloaded file. Open it and wait for the operation to complete.

This method is suitable for those who have a jailbroken phone and cannot reflash it using the first method.

Restoring iPhone via iTunes.

Read also

How it is possible and worth updating the Android version I am often asked if it is possible or worth updating the Android version on a phone/tablet to 6.0, to 5.0, to 5.1, 4.4, etc. Someone wants to update the droid from 5.1 to 6.0, someone from 4.4 up to 6.0, someone with...




Touch ID enabled. output Finger for iPhone protection Some users and potential buyers iPhone devices and iPad don't know what Touch ID is, what it's for, or how it makes a ringtone. Explain. Touch ID. this is a sensor...




This is one of the most difficult subjects to observe. Almost 20 pounds of an 8-channel DVR system in a box—well, sort of a box. How about industrial strength, impact resistant plastic case. not a box. It's not for everyone, but for a mobile situation than. Portable...

Connect your phone to your computer using a cable, launch iTunes if it does not start automatically.

You need to go to the option functions by clicking on the button with the name of the phone type.

Select the firmware and open it. The system will ask for proof of the restoration request. The program, without the help of others, will begin to delete content and download latest firmware to the phone's memory.

After this, the device will be restored using Recovery Mode to industrial options

Gmail.com mail - login to mail and primary options.

Google account: creating an account.

Firmware is the operating system on which a smartphone runs. Consequently, flashing is done if it is necessary to either update the OS version or reset all settings to factory settings. How to reflash iPhone 4 yourself? Apple made sure that each user could independently make almost any changes to the configuration of their device. For flashing to be successful, you will need a stable Internet connection, a computer (laptop) and iTunes program. In total, the procedure will take about an hour.

Tip: Before flashing your iPhone, be sure to make copies of your personal data on another medium, because... they can leave.

Reflash iPhone

There are two ways here - factory reset and update. In the first case, all data is deleted from the phone, and the system returns to the state it was in before purchase, without any updates. The second option implies complete removal old version of the OS and installing the latest version that is available for this device. For example, iPhone 4 and 4s can run iOS 8 without any problems. If you decide to completely update the system, you will not be able to go back to the old version. How to reflash iPhone 4s? Just like any other iPhone.

To reset all settings, you will need to connect your phone to the computer when iTunes help. Then in his personal account view the list of all devices and select the one you need. Next, click on the “Recovery” button opposite the icon of your iPhone and wait until the device reflashes itself; no further action is required from you.

The second method is not much different from the first. The only thing you will have to select is not the “Restore” button, but the “update” button. After that, the device will automatically update itself to the latest version for it. iOS versions. During the update, your intervention may be required to allow any installation additional programs.

Conclusion

Now you know how to flash iPhone 4(s) yourself. To do this, you do not need to have super knowledge in the computer field. Also, before performing restoration or iOS updates transfer all your data (including photos and videos) to another medium to avoid losing them.