Safe mode key. Windows Safe Mode

Hello, today we will talk about " safe mode "Windows and how to start it. To begin with, let's figure out why and why you need safe mode in Windows.

Safe mode may be needed Troubleshooting Windows, virus removal, to reset windows password , For Windows System Restore, error correction blue screen and etc.

How to start safe mode on a computer or laptop? There are several ways to do this, which are very different from each other - it depends on the problem that has arisen, which needs to be fixed through safe mode.

if you you need to reset your password or restore the system, then you need to start safe mode exactly when you turn on the laptop, since you cannot fully start Windows in order to start safe mode from it.

To do this, after pressing the power button on the PC or laptop, immediately press repeatedly on F8 key until the safe mode start menu appears.

If the Internet is required to solve your problem, then you should select the item " Safe Boot Mode network drivers ", then you can connect to the Internet while in safe mode.

Unfortunately, this method does not work on Windows 10, to start safe mode on this version, see the instructions below!

Turn on the computer, wait for the desktop to load, open the command line using the keys "Win" + "R"(The "Win" button is between "Ctrl" and "Alt"). Next, in the window that appears, enter the command " msconfig"and press the button" OK".

Next, in the new window, go to the "" tab, select the necessary Windows if there are several of them installed and check the box below " Safe mode", in the subparagraphs, select " Minimum" (standard) or " Net" (to be able to connect to the Internet). Press " OK" And restart your computer or laptop.

Now your computer will always boot in safe mode with the specified parameters, so after fixing the errors, don't forget to return to the settings Windows startup and uncheck safe mode to fully use Windows!

This method of booting Windows in safe mode is suitable for the following versions Windows: xp, 7, 8, 10.

If your computer cannot load the desktop for some reason, then only the first method above is suitable for you!

If your Windows 10 can boot to the desktop, then you can use the method described above. But sometimes it happens that Windows 10 does not want to boot and safe mode through the key F8 it is impossible to start for the 10th version. There is only one way out - this.

Before turning on the computer, insert bootable flash drive with Windows 10, and set it up so that it is not from the hard drive.

When Windows 10 has booted from the flash drive, click " Shift" + "F10"a command prompt should open, in which we enter " bcdedit /set (default) safeboot minimal" and press "Enter". Next, restart the computer, Windows 10 should boot into safe mode!

To prevent Windows 10 from constantly starting in safe mode, start Windows again from a USB flash drive and in command line enter the following " bcdedit /deletevalue (default) safeboot", restart your computer!

Video. How to open safe mode in Windows xp, 7, 8, 10?

That's all, now you know how to easily and quickly start your PC in safe mode when you turn on your computer or from Windows itself! Good luck and success!

From this article, users can learn about ways to start Windows Safe Mode.

All methods for launching this mode for all versions will be studied in detail. operating system.

What is Safe Mode?

Read also: 3 Ways to disable "Sleep mode on Windows (Windows)" (7/8/10)

Safe PC Mode is a mode in which systems are also disabled. Experts recommend using this mode of operation if you need to remove viruses that have appeared on your computer.

The user may notice that the resolution of the computer has decreased and the desktop has become black. At the same time, inscriptions are visible along the edges of the display.

Often, by starting the system in this mode, the user will be able to solve the existing problem. Please note that safe mode is only suitable for solving problems within the operating system.

For the permanent operation of the installed OS (for example, for editing documents, and so on), it will not work.

If the user has problems with the computer, for example, with installed drivers or software (for example, they are downloaded in automatic mode and the user is unable to uninstall it in the standard operating mode), do not panic - after all, this problem can be dealt with in the safe mode of the personal computer.

To do this, go into it by pressing and holding the F8 key on your keyboard. Having answered the important question of what the "safe mode" function is, it is important to say how it can be turned off.

known various ways solving such a problem. They differ only in the version of Windows used, that is, 7, 10 and others. So you should consider ways for all versions

Common Methods

Read also: TOP 3 Easy Ways How to Show Hidden Folders or Hide a Necessary Folder and Set a Password on It in Windows 10

There are a couple of standard methods in any OS, using which you can enter this mode. And they are one of the simplest.

You don't need any special skills to use them. personal computer, just read the instructions carefully, and then you will succeed.

So, let's begin. Login using the utility msconfig.

In the first method, we will use special utility, which will help us enter SafeMode. You do not need to download it anywhere, it is built into the OS.

Procedure:

Press Win + R and in the window that appears, write

msconfig

(The "WIN" button is located on the bottom line, usually looks like a button "Start" on the monitor screen.)

Then click on the option "Downloads" and by pointing installed version Windows, check the box next to "Working in safe mode" .

This important point consists of several sub-points. When the user does not need secure Internet access, you can select the option "Minimum" . If you need stable network access, select the option "Net" .

Click OK and restart your computer. Next, the safe mode will turn on.

You will be able to continue the work you have started and take the necessary actions. This is important: after all problems are resolved, switch to Standard mode before continuing.

To do this, repeat the first paragraph and by clicking on the option, remove the option to enable safe mode.

However, when choosing this option, keep in mind some details: it is only suitable for those users who have no difficulty booting the OS.

When it is not possible to install Windows normally, or, for example, there are problems loading the desktop, it is worth trying other methods.

Login by pressing F8 . As already mentioned, this method is only suitable when the user has problems loading the OS.

In such a situation, the user must perform the following actions:

1 First turn on your computer and immediately press the small button F8 several times. As a result, a menu should appear. With some computers, you can use other keys or combinations (for example, shift + F8 ). This is important: when the display is off or the user sees Windows inscription It means that he didn't succeed. In this case, you should wait until the system boots, and after restarting your computer, try again.

2 If the user succeeded, a menu will appear. Using the arrows, the user can easily select the desired mode. If he does not know what exactly he needs, he should stop at "Safe Mode" , since this option is considered universal. Having selected the desired option with the arrows, the user must confirm his choice with the Enter key.

As a result of such actions, the computer will restart in safe mode.

But you need to keep in mind that the above algorithm of actions will not start safe mode in, because. The developers have disabled this option.

Safe mode in XP and 7 "seven"

Read also: TOP 5 Ways to fix the error "0xc0000142" when starting games and applications | Windows 7/10

If you use these operating systems, then you can use the already named standard methods.

If the operating system starts, the first method should be used.

If nothing could be started, then we use the second method. There are no specific steps.

VIDEO: How to enter safe mode in Windows 7 (XP)

How to enter safe mode in Windows 7 (XP)

Safe Mode in Windows 8

Read also:

Do you have an "eight"? There was an urgent need to use safe mode? Again you can use the standard methods to do this, but there are at least 2 more ways to do this. Let's take a closer look at them.

Diagnostic Tools

This method is relevant and will be useful only when the operating system was able to start on the computer.

Open "Options" – this icon is located on the panel on the side (in order to open this panel, put the mouse in the extreme right corner), click on "shutdown" , after pressing the Shift button, and select the item.

If you did everything correctly, the diagnostic screen will open. In the window that opens, select "Diagnostics » -> "Extra. Options" -> "Download Options" and confirm "Reload" .

In the next step, you will see several download options. Choose an option "Enable Safe Mode" . Hence, it is the F4 key.

When safe mode starts, you can do all the necessary actions. In order to start the standard PC mode, simply restart the computer.

You will see a window in which you will see download options. We need item number 4, so we press "F4".

Run from Flash Drive or CD

Although it is lightweight, if you are not an experienced user, then it is better to ask someone more knowledgeable, well, or just skip this option.

But if you decide to do everything yourself, then carefully read the instructions. It uses a special bootable USB drive (flash drive) or a special bootable CD.

You can make them on any computer from any or CB, respectively.

Do the following:

1 Connect a USB flash drive (or CD) and boot from the media.

2 A window with date and time settings will appear. Don't be scared, just press the button "Further" .

3 In the window that opens, select "System Restore" . The diagnostic screen will appear. Not the one we are in the previous method.

Safe Mode is one of the ways to troubleshoot Windows OS. This method starts the system with startup settings only system files, services and drivers. Other programs, as well as minor services and drivers, will not be launched, because this is necessary to detect and eliminate the source of the computer's inoperability.

This option is often used advanced users. But if you carefully understand the manual, you can also learn how to run a safe windows mode 10 / 8 / 7 and debug the system. So, for example, if there are no errors in the system operation when starting the OS in this configuration, then the default parameters can be deleted from the list of error causes.

There are three types of safe mode: simple; with command line support; with loading network drivers. These views are very similar, and the difference is only in loading additional services and device drivers. Unfortunately, in Windows 10, the ability to start this mode when pressing F8 was removed, so most users who have upgraded or switched to version 10 are wondering how to start the system with these parameters. There are many methods for switching to safe use mode, and we will analyze the universal methods:

Let's examine each of these methods in more detail.

How to enter safe mode by rebooting?

This method is convenient and simple, but not everyone can boast of having discovered it personally. So what should be done? You must click on the “Windows” icon (“Start”), then select “Shut down” - a selection menu will appear containing three options for shutting down: “Sleep”, “Shut down”, “Restart”. Press "Shift", then press "Restart".

The picture on the monitor will change to blue and the message “Please Wait” will be displayed on your monitor. After loading, we observe three possible options for action: “Continue”, “Diagnostics”, “Turn off the computer”. Of these three options, you need to select the second item - "Diagnostics".

After clicking, a diagnostics menu will appear with three options for action: the first is “Restore”, the second is “Return to the initial state"and the third -" Extra options". You need to select "Advanced Options".

After clicking on "Advanced Options", an action menu appears consisting of five sections. "System Restore" allows us to restore the Windows system using a restore point that was created earlier. "System Image Recovery" helps you restore Windows using a system image that is on removable media. "Startup Repair" allows you to troubleshoot problems that prevent the OS from starting. "Command Prompt" is going to the console, while "Boot Options" is just setting configurations on startup.

Now, after the reboot, we see a blue picture with the boot settings, in which there are already nine items. But only those whose number corresponds to the following numbers are relevant to safe mode: 4, 5, 6. These items and their differences were mentioned at the beginning of the article. So, each item is associated with a key: the first item has the F1 key, the second item has the F2 key, the third item has the F3 key, and so on. We need the fourth item, so we press the F4 key. After that, it starts in safe use mode. The image, as well as the ability to run files and services will be limited: do not be alarmed, because the mode is designed to detect errors.

How to enable safe mode through system configuration?

The msconfig command is a tool that is very useful and necessary for working in Windows. To run this utility, we need to use the key combination on the keyboard "Win" + "R". After pressing the buttons, a window will appear, and you need to write the “msconfig” command into it, and then press “OK” or “Enter”. There is another way to launch the "Run" window - we need to click on the "Start" icon right click mouse, and then select "Run".

The system configuration window will launch. Go to the "Download" tab, there is a configuration for safe mode. First you need to make a choice of the operating system that we will run. In the section called "Boot Options" you need to check the box next to the "Safe Mode" section. You can also set a timeout in this tab, that is, a delay time for choosing the type of launch before the OS starts.

Note! The timeout value must be equal to or greater than ten.

Also in this tab it is possible to set these OS settings permanent, for this you need to check the corresponding box. And then click "Apply", and after "OK". It remains to reboot and select the startup mode. When you're done with safe mode, you should log in to msconfig again and enable normal system boot.

How to enter safe mode using command prompt?

For use this method we will need a command line: it is called by clicking on the "Start" icon (right-click), and after selecting the "Command line (Administrator)" section.

These actions will lead to the opening of the command line, and here you need to write commands that will be executed with the set parameters. We enter:

Bcdedit /copy (current) /d "Safe Mode"

The team will ask new parameter in the msconfig utility. Going to the "Boot" tab, we will find the possibility of starting an OS with the name "Safe Mode". Next, go to "System Configuration" and go to the "Boot" section: there we need to select "Safe Mode (C: / Windows)" and check the box next to "Safe Mode".

It remains to restart the computer and, before starting Windows, select "Safe Mode" in the startup mode selection window. Now every time you start the PC, a window will pop up that will prompt you to select the type of boot. To disable this function, you will need to do the following: use the key combination "Win" + "R", write the command "msconfig", confirm by pressing Enter. The “System Configuration” window already familiar to us appears: we make the transition to the “Download” section. Left-click on the "Safe Mode" item, click "Delete".

Special download options

We are looking for the notification icon located in the lower right corner, and click on it, select the "All settings" section.

In the section that appears, we click on "Update and Security".

After that, we are looking for “Recovery”, click and in the right block click on “Restart now”.

The subsequent steps and actions are similar to method number one, which is presented at the beginning of the article, so we confirm the reboot.

Windows installation disc

Use this method if you are unable to start the login. We place boot disk into the PC drive and log in from it. Next, select the language, after which the following window should appear:

We need to find the inscription in the lower left corner of the "System Restore" window and click on it, then select "Diagnostics", followed by "Advanced Options" and after "Command Prompt". The console will open, in it you need to register:

bcdedit /set (default) safeboot minimal

After all, we restart the computer and the OS automatically loads in safe use mode. To return to the previous state, you will need to enter the following command:

bcdedit /deletevalue (default) safeboot

You can use another method by typing the following on the command line:

bcdedit /set (globalsettings) advancedoptions true

After the reboot, the system will display system boot options. To disable this option, you need to specify on the command line:

bcdedit /deletevalue (globalsettings)advancedoptions

Note! The command is written in the standard boot mode. If you do not know how to exit Windows Safe Mode, then we remind you that you can do this by simply restarting your PC.

Windows 10 inherited all the features of the boot system from Windows 8, providing the same graphical environment for performing system recovery tasks. It is expected that system recovery operations after failures will be predominantly performed by the system automatic recovery. In the event that Windows 10 does not boot correctly, the automatic recovery system starts, which, without user intervention, tries to find and fix problems that prevent the system from loading normally. However, this does not mean that Windows 10 does not have a safe mode (Safe mode), just that this boot mode is hidden from users by default.

In some cases, it is necessary to start the system in safe mode, for example, to debug or, a driver, or an application. Let's see how to enable safe mode in Windows 10.

Windows 10 can be booted into safe mode in several different ways.

MSConfig Utility (System Configuration)

The easiest way to boot Windows 10 in safe mode, just like the previous ones Windows versions, use the utility msconfig.exe. For this:

Advice. You also need to disable booting in safe mode using msconfig by unchecking the Safe boot item.

Shift + Restart combination

In the start menu, press the Power button and, holding Shift on your keyboard, select Reboot System ( Restart)

Note. The same Shift+Restart combination can be used on the login screen.

In the dialog that appears, select the items Troubleshoot(Diagnosis) -> advanced options(Advanced options)-> Startup settings(boot options).

Reboot the computer by clicking the button Restart.

After the reboot, a window will appear with the available options for booting the system (9 options, including three types of safe mode). To boot into Safe Mode, press F4 or 4 (or F5/F6 to boot into Safe Mode with Networking or Command Prompt, respectively).

Launching diagnostic mode from the interface of the new Control Panel

To launch a new modern Panel Windows controls 10, click start and select menu Settings. Then go to section Update &security.

Go to section Recovery and in section advanced startup click Restart now.

Starting safe mode from the command line

It is also possible to customize Windows startup 10 in safe mode and from the command line. To do this, open a command prompt (cmd) with administrator rights and run the command:

Then restart your computer with the command:

Now Windows 10 will always boot in safe mode. To return to normal boot mode:

bcdedit /deletevalue (default) safeboot

Returning the old text boot menu

In Windows 10/8 it is possible to revert to the old Windows text loader that supports the key F8(Shift + F8) and the ability to select system startup options.

Note. The boot speed of the system with such a bootloader will be lower.

To return the test loader, run from a command prompt with administrator rights:

bcdedit /set (default) bootmenupolicy legacy

Now, when booting the computer after the self-test stage (POST), you need to press the key several times F8. The good old text menu with system boot options should appear.

To disable the bootloader's text mode, and return to fast loading, run:
bcdedit /set (default) bootmenupolicy standard

Launching Safe Mode from Recovery Mode

Few people know that in order to enable safe mode and other recovery options in Windows 10, it is enough 3 times in a row interrupt the system boot with the power off button.

The system recovery environment will start for 4 times ( recovery mode ), from which you can choose to boot in safe mode or other options for booting the system.

Select an item See advanced repair options and follow the instructions from the second paragraph of our article.

A new smartphone or tablet based on Android always works without failures and glitches. But what to do if, in further use, the device suddenly “slows down”, the speed of its operation slows down, applications do not work correctly, the sensor reacts unstably? Such problems can be solved by enabling the safe mode of operation. On an Android device, Safe Mode will allow you to determine what is causing the problem.

If the phone is working normally in safe mode, then the “glitches” with it are due to some application.

How to turn on: 3 ways

Of all the methods of inclusion, the most relevant, perhaps, are the following:

Method 1

Method 2

1. Turn off the phone.
2. When the display shows an inscription corresponding to the brand name of the smartphone or the inscription Android, you must press the volume up button.
3. In this case, after turning on, the inscription “Safe Mode” will appear at the bottom of the screen.

Method 3

If the above methods do not work, then try this:

1. The device must be turned off.
2. While downloading, hold down the volume down button.
3. After that, safe mode will turn on.

Note: in some versions of Android, to switch to Safe Mode, you need to restart the smartphone manually, and at the time when the operating system logo appears on the screen, you need to press the volume up and down buttons and hold until the device is fully loaded.

How to disable: 2 options

No less relevant is the issue of disabling safe mode. Before doing this, you must restart the device, and then use one of the proposed options.

First shutdown option

1. The phone turns on, after a reboot, Safe Mode automatically turns off.
2. If the automatic reset of the safe mode did not happen, then you need to remove the last application that was installed, for this you need to select the Settings item in the application menu.
3. When you select this application, the Uninstall option will be offered. This is the point to touch on.
4. After the above steps, reboot your device.

The second option to disable

If the first method did not give the desired result, then you can try the second method - reset to factory settings:

1. First you need to select the Settings item from the menu, in the expanded menu, touch the item Backup and reset settings.
2. In the proposed menu, select Reset to factory settings, then Reset smartphone / tablet.
3. Delete everything. After that, the device will be like new. But keep in mind that everything installed applications and personal data will be deleted. Only the factory settings set by the manufacturer will remain.

Thus, Safe Mode loads only the necessary number of programs and utilities, only the necessary components. It is for the security of user data that the manufacturers have developed the above mode, and only those applications installed by the manufacturer of the device will work. All other programs that were installed by the user himself may carry some kind of threat, and therefore will be disabled.

Even if the phone has serious problems, and in standard mode it no longer performs its basic functions, it can still work in safe mode. For example, the battery began to discharge too quickly or the call button does not work, before handing in such a device for repair, you can check its performance in this service mode.