Is cryptopro installed? Installing a cryptopro

To protect the transmitted data on the Information Portal croinform.ru, a tool is used cryptographic protection information (CIPF) of the Crypto-Pro company. To install this software, follow a few simple steps.

Step 1. Downloading the CryptoPro CSP distribution (version 4.0)

To download the distribution kit, go to the CRYPTO-PRO website http://www.cryptopro.ru/

In the Login form, enter the following username: MBKI , password: MBKI and click Login

The Download Center page opens. Select from the list of programs CryptoPro CSP(First on the list).

Choose distribution kit CryptoPro CSP (version 4.0) which suits your operating system. Save the file to disk.

Step 2. Installing CryptoPro CSP (version 4.0)

Run the distribution kit of the CryptoPro CSP program downloaded at step 1. The "Installation window" will appear on the screen. Select the recommended installation option, "Install (recommended)".

A window will appear showing the CryptoPro CSP installation process.

After the CryptoPro CSP installation process is completed, you will receive a message.

The temporary license is valid for 30 days. After this period, the full package of CIPF functions ceases to work, however, some of the information protection functions necessary for working with the Information Portal remain.

After purchasing a license in our online store, you will receive an email by e-mail where you will find:

• license key product
• link to product distribution
• link to user manual

Step 1

First you need to find out if you have installed Cryptopro CSP earlier and if installed, what version?

This can be done by carefully examining your Start menu: there should be an item CRYPTO-PRO, which has a program CryptoPro CSP.

If you didn’t find it, most likely you don’t have CryptoPRO installed, so feel free to go to.

If found - run CryptoPro CSP. There we see the General tab, where the license validity period and version number are indicated.

If the version number corresponds to the version you purchased (for example, if the window says 4.0.****, and you bought CryptoPro CSP 4.0, then it matches), then you you can not reinstall the program, but simply enter the license key. How to do it - look at .

Step 2

You found out that the program is not installed for you. So, you need to download CryptoPro CSP and install it.

Downloading it is not so easy: a cryptographic provider is a means of cryptographic protection of information, which means that its distribution is subject to registration with the relevant authorities. Therefore, you will need to follow the link that came to you in the letter or go to the CryptoPro website on your own at the link http://www.cryptopro.ru/downloads and select from the list of products CryptoPro CSP.

You will see something like this:

Click on the link " Pre-registration" and fill out a form from a variety of fields. After filling out the form and registering, you will be required to agree with license agreement, and then still get the opportunity to download the distribution package of the program.

At the time of publication, the distribution selection page looks like this:

If you have purchased the version CryptoPro CSP 3.6, then you will need to select the version R4 It is by far the most functional.

If you have purchased a license for CryptoPro CSP 3.9 be careful: CryptoPro CSP 3.9 - certified version, but does not support Windows 10, CryptoPro CSP 3.9R2- supports Windows 10, certification planned for Q4 2015

If you bought version 4.0, then select the CryptoPro CSP 4.0 item accordingly (recommended for working with Windows 10, certification is planned for the III quarter of 2015).

You will need to download this file:

Step 3

you downloaded setup file CryptoPro CSP, and now you will need to install the program itself. To do this, run the installation file, if we see a security warning, you need to allow the program to make changes on your computer. In the opened press the button Install (recommended)

The installation of the program takes place automatically within a few minutes and does not require user intervention.

All, Installation completed.

Step 4

Now you need to enter the license key in a special window. You can get to it this way (the path may vary slightly depending on the version of the operating system):

Start - Programs - CryptoPro - CryptoPro CSP.

Then we press the button Entering a license

In the window that opens, fill in the fields in accordance with the license received.

Step 5

We rejoice! We have just installed a crypto provider. Not so difficult, right?

But you need to understand that CryptoPro CSP itself cannot do anything. The next step you will need to install (or just configure) programs that will interact with CryptoPro CSP and solve your problems, whether it is an electronic signature, encryption or something else.

Usually, to carry out electronic signature use or - they can be purchased from our online store. We tried to make the purchase as convenient as possible: electronic licenses are sent immediately after payment (even at night), a large selection of payment methods.

If the instruction seemed useful to you - share it, you will find the buttons for this right below the article.

IN the following instructions i will tell you how to install CryptoPro Office Signature , CryptoARM how to work with tokens and so on.

If you don't want to miss our articles - subscribe to us at in social networks! Links to our social media pages can be found at the very bottom of the screen.

Installation via the View Certificates in Container menu

1. Select "Start" > "Control Panel" > "CryptoPro CSP", go to the "Tools" tab and click on the "View Certificates in Container" button.

2. In the window that opens, click the Browse button to select a container to view. After selecting the container, click on the "OK" button.

3. In the window that opens, click the "Next" button.

4. In the next window, click the button« Install”, and then affirmatively answer the certificate replacement notification (if it appears). The certificate is installed.

5. If the "Install" button is missing, then in the "Certificate for viewing" window, click on the "Properties" button.

6. In the window that opens, select Install Certificate.

7. In the Certificate Import Wizard window, select Next . In the next window, leave the radio button on Automatically select a store based on certificate type and click Next. The certificate will be installed in the Personal store.

8. In the next window, select "Next", then click on the button "Finish" and wait for the message about successful installation.

Installation via the menu "Install personal certificate"

For installation, you will need a certificate file (a file with the .cer extension). The certificate file can be exported from the Personal store. If the repository does not contain the required certificate, contact technical support by the address [email protected], indicating the TIN and KPP of the organization and the essence of the problem.

1. Select Start > Control Panel > CryptoPro CSP. In the CryptoPro CSP Properties window, go to the "Service" tab and click on the "Install personal certificate" button.

2. In the "Certificate Import Wizard" window, click on the "Next" button. In the next window, click on the Browse button and select the certificate file.

4. In the next window, click on the "Next" button.

5. Click the Browse button .

6. Specify a container private key corresponding to the certificate and click OK.

7. After selecting the container, click on the "Next" button .

8. In the Select Certificate Store window, click the Browse button.

If CryptoPro CSP 3.6 R2 (product version 3.6.6497) or higher is installed, then check the box "Install certificate in container".

9. Select the Private storage and click OK.

10. After selecting the storage, click on the Next button, then Finish. After clicking on the Done button, you may be asked to replace the existing certificate with a new one. In the prompt window, select Yes.

Wait for a message about successful installation. The certificate is installed.

How to install CryptoPro on a computer, installing CryptoPro 4.0

CryptoPro CSP - is a cryptographic provider and provides the legal significance of electronic documentation, protection of connections. This is a key product among CryptoPro products. How CryptoPro CSP install most questions arise. We suggest that you familiarize yourself with the information below for the correct installation of the program. To install this software on the computer, the user must have administrator rights. The software on the disk must be inserted into the drive or select the folder with the distribution kit on the computer. After launching the Setup Wizard, you must select the language to be used. During installation, there is also the option to select the level of protection (class).

Further installation is carried out in accordance with the choice of actions indicated by the Installation Wizard. So you may need to specify the serial key, configure additional sensors, adjust the CIPF to use the key storage service. Installation can be full and selective, depending on the user's tasks. Custom installation will help you install additional required components. It is advisable to restart the computer after installation for the program to work correctly.