Apple TV black screen. Apple TV won't turn on

The installation procedure itself, although not complicated, requires an understanding of what you are doing. Very often, incorrect connection of the device is at the root of the problem: the Apple TV does not turn on. If you also encounter a similar problem, then it is initially recommended to check the various connections and input connectors to determine the extent of the malfunction.

Apple TV won't turn on: checking if the connection is correct

If your Apple TV won't turn on, you can check the connection in several steps:

• First, you should make sure that the cable that connects the Apple TV and the TV is connected correctly. The connection process is to connect one end HDMI cable to the TV panel, and the other to the Apple TV panel. If you don't have such a cable, you can use an audio and video cable;
• It is also necessary to check the strength of the connection of the power cords of the device, as well as the television device to the power supply. Connect power cords by plugging one end of the cable into the Apple TV panel and the other into a power outlet;
• Later, you should turn on the TV, select the desired type of input channel;
• Next you should reboot the device. The reboot is performed by sequentially pressing the keys: Settings – Basic settings – Reboot.

If the Apple TV does not turn on even after all the work done, and there is no expected response to attempts to restart the device, you need to:

• Hold down the Menu button and then the Down button, release when the light on the Apple TV blinks (this should happen within approximately five seconds);
• Unplug the cable that provides power for a few seconds and then plug it back in to establish a new connection.

Devices required for connection

It is also important to be absolutely sure of the availability of the devices that are needed to connect to the Apple TV; sometimes the Apple TV does not turn on precisely because of their partial absence. In order to successfully use the device, you must:

• Connected Internet (connection about two and a half Mbit/s);
• An entry that allows you to purchase and rent movies and shows;
• TV.

Apple TV won't turn on: power problem

The reason why the Apple TV does not turn on may be power problems. An indicator that blinks for more than a few minutes may indicate problems with power supply; if this is the case, you should restore the device.

There are several steps you need to take to restore power:

• By alternately pressing the buttons: Settings – Basic settings – Reset – Restore;
• Previous actions should lead to recovery initial settings followed by installation new version, do not turn on power until recovery is complete.

Finally, it should be recalled that during connection it is not recommended to place foreign objects on the device, as this can create certain interference that can negatively affect the creation of a working connection.

If your Apple TV does not turn on, you can also contact us, we will always be happy to help you fix any problems you may have with your equipment and make your life easier. Specialists will quickly eliminate all the reasons why your Apple TV does not turn on and will extend the life of your device. All connection work will be completed quickly and efficiently, and they will provide a guarantee for their services.

Wonderful Apple TV set-top box! And today I would like to talk about a small problem that can happen to her. I think some of you have already seen a picture on the screen where Apple TV requires a connection to iTunes. Everything seems simple, but, as always, there are pitfalls...

So, first we need to disconnect Apple TV from the TV and disconnect all cables. Next, we need a computer with iTunes installed latest version. Among other things, we need micro USB cable<->USB, which is naturally not included, but can be easily purchased at any store consumer electronics. If you have a complete set of all of the above, then you can get started!

Flashing Apple TV

We connect the Apple TV to an outlet, and using micro USB cable connect to the computer. If your console went crazy in recovery mode, it should show up in iTunes. But sometimes, iTunes may not see the connected set-top box. In this case, there is no need to run to the store for another cable; just enter the Apple TV into DFU mode(Device Firmware Update).

To activate this mode, you need to connect the power cable to the set-top box, connect the Apple TV to the computer and click on the following combinations on the Apple Remote:

1) Press and hold the Menu and Down buttons for 6 seconds. After this, you will see that the indicator on the set-top box has gone out.

2) Without releasing the Menu button, release the Down button and press Play, and hold Menu and Play for 6-7 seconds until the console appears in iTunes. After this, you need to wait 10 - 15 seconds. If everything is done correctly, the indicator on the Apple TV will start blinking quickly, and the following image will appear on the computer screen:

After that, click on the “Restore Apple TV...” button and follow further instructions. If everything went well, then at the end, you can reconnect the set-top box to the TV and start using it!

If for some reason you were unable to flash your Apple TV, don’t despair - you can write in the comments about your problem or :)

Playback console streaming video from Apple cost 4500 rub. - this is access to a huge collections iTunes music and movies, access to Internet , as well as the ability to wirelessly stream your media from your iPhone, iPad or computer to your TV. My tips will help you find without any problems mutual language with Apple TV.

Proper control of the Apple TV set-top box

The design of the Apple TV remote control with its several buttons can hardly be called chic. But even with his asceticism, it is not easy to find the right function. Our little tricks will make your life easier.

• Return to Home Screen. Instead of clicking on submenu items to return to main screen hold down the button Menu on the remote control for two seconds.
• Audio tracks and subtitles. To select an audio track or turn on subtitles, hold down the select key for two seconds while a movie is playing. In the pop-up menu using cross buttons select Audio , navigate to the desired track and confirm your intention by pressing the select button. Do the same in the subtitles menu.
• Remote control from iPhone. The console is very convenient to control from your iPhone. Download free from the store Apple app Remote, click on Add device and follow the directions.

Arranging icons

Do you often watch online videos from Apple TV? Then put the corresponding icons, for example YouTube, Watchever and VeVo, on the top line so as not to click on the buttons again. To do this, use the cross button on the remote control to select the service whose shortcut you want to have at hand, and hold down the selection button until the icon starts to swing. Then move the icon using the D-pad to the desired location and press the select button again.

Setting the Image Resolution

If you have a third-generation Apple TV (as indicated by the "1080p" label on the box), you can watch videos in Full HD. To set the maximum resolution, select Settings, Audio & Video and Resolution . Activate 1080p HD 50Hz and press the select button.

Transfer files to Apple TV

You can stream your media from your iPhone, iPad, or Mac to Apple TV in an instant—as long as the devices are in the same location. wireless network. After selecting the file, click on the transfer button (square with an arrow), then on the icon AirPlay and by Apple TV and the file will be on the console.

You can also send a picture to the TV screen from iPhone display and iPad (AppleTV 2 and iOS 5, iPhone 4S, iPad 2) to, for example, play Angry Birds Star Wars in 40-inch format.

On iOS 7: Move the control center from the bottom of the display to the top. Select the AirPlay and AppleTV icon and activate the Screen Sync option with a tap of your finger.

On iOS 6: Double tap the Home button and move to the right until you see the icon AirPlay. Touch it, click on Apple TV and select Screen synchronization .

How to open video files with iTunes

Sending every single video file from your computer to your Aplle TV via AirPlay is hardly fun. With iTunes everything is much simpler. Files from your Library can be opened and played immediately in Apple TV Home Sharing. First you need to set up access to files from iTunes on your computer. Click on the drop-down menu icon on the left top corner screen and then select Media library And Activate Home Sharing — to do this you will need to enter your Apple ID login. Next, set up access to your collection from Apple TV. Select from Home Screen Computer , Activate Home Sharing , enter your Apple ID and click the button Ready . Now, when you click on the Computer icon on the Home screen, you will have access to the content of your iTunes library from your AppleTV player.

Apple products are famous for their ultra-convenient user interfaces and the possibility of easy and quick setup. Of course, this statement is also true for Apple TV. Connecting it to the TV is not at all difficult and takes about 8-10 minutes.

First of all, you need to unbox your Apple TV. Please note that HDMI cables are not included in the package, so you will have to purchase them separately. Connect the cable to your HDTV and Apple TV, then plug your device into an outlet.

If the connection is established correctly, it will begin to boot, displaying the Apple logo on the screen. Select the language you want to use in the menu using the remote control (this is done using the volume switch and the button in the center).

Apple TV will start scanning available Wi-Fi networks to connect to them (assuming you're using Wi-Fi, since Apple TV can also connect via Ethernet). Find your connection and select it, then enter the password and click OK. Apple TV will begin connecting to the network if you have entered all the information correctly.

When asked, select whether you want any diagnostic information to be sent to the Apple website. If you need such data exchange, make the appropriate settings, and information about how Apple TV works (if problems are observed, for example) will be transmitted to the company's official website. At the same time, your personal information will not be sent anywhere, so there is no need to worry.

Make sure that on your main home computer The Home Sharing service is installed and working correctly. It allows you to stream content from your iTunes library to Apple TV, which will be displayed on your HDTV. Of course, you can use Apple TV to connect to the Internet and get files without using this service, but with it you get more options.

After completing all the above steps, everything should be synchronized - the Apple TV must be connected to a Wi-Fi network and the Internet, as well as to the iTunes library on your computer.

You can now play music or video from AirPlay or web content from ITunes Store, Netflix, YouTube and so on. There is only one thing left to do - keep track of software updates.

Control Apple TV with iPhone

With the arrival of iOS 7, Apple has provided an even faster and easier way to set up your Apple TV using just your iPhone. This was made possible thanks to the introduction of iBeacon − new feature, which allows reading CDs using iOS 7. Using the built-in Bluetooth technology iBeacon allows iPhone or iPad (starting from the third generation of gadgets) to synchronize with Apple TV (third generation running operating system 6.0). The service also uses Bluetooth to transmit all the information the Apple TV needs to connect to a local wireless network. In addition, iBeacon transmits information necessary for Apple connections TV to the iTunes Store, so you can purchase music, movies and TV shows and display them on your TV with using Apple TV.

Once your Apple TV is connected to and synced with your TV, prepare your iPhone—it should be unlocked and connected to your local wireless network.

You must also turn on Bluetooth. Then lightly touch your iPhone to the top of the Apple TV, then move the iPhone within 20cm of the Apple TV. Then on the smartphone screen you should see the inscription “Do you want to continue?” Click Yes.

You will then be prompted to enter your Apple ID and password. Enter these details and then click OK in the dialog box. Now you will see two requests: whether to save your Apple ID on the Apple TV in order to make future purchases in the iTunes store, and whether to allow the Apple TV to send diagnostic information to the company's website. After answering these questions, Apple TV begins the setup process.

The setup process will not be displayed on the screen. Despite the fact that visually it will appear that nothing is happening, you must wait about 1 minute. When configuration is complete, your Apple TV will be connected to local network Wi-Fi and account iTunes store will be tuned. After this, the device is completely ready for use.

However, if the selected wireless network does not connect or there are multiple Wi-Fi networks available in range, you may receive the following message during the installation process: “There is a problem connecting to the network. Wi-Fi network"You are trying to connect to cannot be found." If this happens, simply press the Menu key on your Apple TV remote, select Other, and then use the remote to enter the name of the wireless network you want to use. When Apple TV recognizes the network your iPhone is connected to, it automatically proceeds to setup.