Magnetic cable USB - micro USB Mantis V.2 - Silver. Micro-USB cable with device charge indicator Check the current that the cord can carry

Mantis USB Nylon Magnetic Cable – micro USB is a convenient and modern accessory designed to connect your smartphone to a charger, tablet or computer. You will appreciate the huge advantage of using such a wire while driving, when your phone battery runs out at the most inopportune moment, and it is dangerous to be distracted from the road. When using a cable with a magnetic adapter, you do not need to switch attention to connecting the charger. Simply magnetize it and the charging process will begin.

Advantages of Magnetic USB Cable - micro USB Mantis V.2 - Silver

Multifunctionality

With this cable, you can not only charge your smartphone, but also transfer data from your smartphone to another storage device. To do this, the side of the cable with the indicator must coincide with the narrow side of the connector.

Simplicity and ease of use

The adapter is attached once and stays in the connector very tightly. In the future, you just need to magnetize the wire. There is no need to pull out the adapter every time, thereby wearing out the connector.

Reliability and wear resistance

Frequent use of standard cables leads to their rapid wear. The nylon braid on the Mantis cord prevents it from kinking. Tests have shown that it will not fray, will not tangle, and will withstand a minimum of 30,000 cycles.

Protecting the connector from small debris and dust

The magnetic adapter also acts as a kind of plug and protects the connector from small debris, dust and water getting into it.

Save time

You only need 1 second to connect your phone to the charger. Simply connect the cord to the adapter. They will magnetize automatically.

We present a selection that will interest almost every smartphone owner - 5 reliable USB cables for fast charging devices.

Choose the appropriate cable model for your phone and order it on AliExpress with free shipping all around Russia.

The products presented in the selection are only from trusted sellers with excellent service.

Happy shopping!

Looking for a charger for your iPhone? The MCDODO Lightning USB cable will definitely come in handy If, of course, you have an iPhone 5, 6, 7, 7 Plus and 8. This is a smart accessory with auto-shutdown and fast charging functions.

The cable length is 120 cm and 180 cm. The seller offers it in 4 unusual colors, for example Tiffany color.

By the way, the MCDODO cable is also compatible with iPad Air, air2, air 3, Air 4 and Mini 2. Rated for 15,000 charging times.

Another one useful feature- This is an LED indicator. Thanks to the improved quality of the materials from which the charger is made, the life of the product increases. Reviews about the product are good.

In general, every iPhone owner needs such a cool MCDODO cable with auto-shutdown.

Customer reviews:

• The cable is great! Stiff and doesn't bend much. Delivery 15 days to Moscow region. I’ll add more later, depending on how long it lasts.
• The track is tracked, delivery is about a month, the cord is of high quality, only a little hard (according to the comments they say that it will become softer over time), it copes with its functions, about half an hour after a full charge it turns off the power supply (that’s why I bought it) . I'm satisfied 5+

Seller's reliability: excellent!

Delivery within Russia: free!

Need a charger for Samsung, HTC, Xiaomi, Sony? The VEnTIOn micro USB cable will come in handy If, of course, you have Samsung, HTC, Xiaomi, Sony.

This is a smart accessory with auto shut-off and fast charging functions.

Cable length - 1, 1.5, 2, 3 m or 50 cm. The seller offers it in 3 colorful colors.

By the way, the Micro USB 2.0 cable is compatible with Android.

The cable is made of quite high quality. Reviews about the product are good. It will last a long time, and it charges your smartphone quickly.

In general, every owner of Samsung, HTC, Xiaomi, Sony needs a Micro USB VEnTIOn cable.

Order it for yourself on Aliexpress with free delivery throughout Russia.

Customer reviews:

• Everything arrived perfectly, as in the description. Charges great. I conducted an experiment: my meter-long 1-amp wire charged 10% in 16 minutes, and this 1.5 (!) meter wire charged 16% in 16 minutes. The quality is also great. The connector can be reached through the millimeter case normally.
• I constantly order from this seller, another order and everything is great.

Seller's reliability: excellent!

Delivery within Russia: free!

Micro USB Type-C cable from Pzoz - a new product among fast charging devices for smartphones, it is on a magnet. Magnetic data cable. Compatible with iPhone 7 and 6S, HTC, Panasonic, Samsung, Sony, LG.

A smart gadget with auto shut-off and fast charging functions.

The cable length is 1, 2 m and 3 m. The seller offers it in 6 unusual colors.

Another useful feature is an LED indicator indicating the charging time of the smartphone. Thanks to the improved quality of the materials from which the charger is made, the life of the product increases. Reviews about the product are good.

By the way, the magnetic plug for the cable holds the weight of the phone quite firmly if you hold it by the wire.

In general, every iPhone owner needs such a cool MicroUSB Type-C cable with auto-disconnection.

Order it for yourself on Aliexpress with free delivery throughout Russia.

Customer reviews:

• Great cable! Flexible, soft. The magnet is strong and can withstand the weight of the phone without jerking. A very convenient thing, I recommend it! Delivery 35 days, fully tracked.
• USB input and the yield turned out to be less than I expected! The quality is normal, the compactness was a pleasant surprise! Akum 4100 charges without loss of time! Good quality for the price!! Time will tell the rest!

Buy on AliExpress.

My smartphone does not have an LED charge indicator. And sometimes it’s difficult to understand whether it’s charging inside or not; you have to unblock it and see for yourself. And this is inconvenient because I’m lazy. There are several ways to get out of this situation, and the most budget-friendly of them is described below.
And so... the cable is OEM, comes without anything and looks similar to many of its no-name brothers.


The USB connector is no different at all; the same topology and the same workmanship.


But the micro-USB connector is more interesting in this context. Its insides are made of transparent plastic and thereby serve as a light guide.


A few more words about the cable itself...
The stated length of 1 (one) meter does not correspond. More specifically, it exceeds (!). In fact, we have about 120 cm.


The diameter including the braid is approx. 4 mm. The braid, by the way, is dense and even. It's quite pleasant to the touch - it's nylon after all.


Let's look at the main feature - light signaling more details.
When power is applied, the transparent base of the micro-USB connector begins to glow and changes its color a couple of times from green to red and vice versa. This process is quite fast, happening in about a second. Ultimately, the light guide begins to glow an even green color. The glow is not bright, does not irritate or distract. No blinking, sticking, ripples, trembling or other special effects were noticed.


The color changing show is repeated when a load is connected (in the form of a half-starved tablet). The color changes again a couple of times, but now it stops at a solid red.


This continues until the current in the circuit drops to a quarter ampere.


The value of 0.25 amperes is the threshold value, overcoming which signals the end of the charge and is accompanied by a change in the color of the indicator from red to green. But here, without any frills, click and that’s it.


): I was unable to achieve the promised sky-blue glow (as in the seller’s photographs). For me this is not critical; a two-color display is enough for me. But as they say, a sediment remains... in general, it seems that the photographs in the description were taken from a different revision/model of the cable.
Also, I was not able to pass a current of 5 volts / 2 amperes through this cord. Although the results turned out to be quite good, especially considering the length and origin of the cable. Somehow, I was able to record 4.81 volts at 1.64 amps.

Electrical measurements

To make the picture objective, let’s first test the Prestigio HKA01105021-XE power supply.


Its performance characteristics in practice look like this:
Idling - 5.23V⎓0.00A


When connecting a resistor in “1 A” mode - 5.04V⎓0.96A


... in “2 A” mode - 5.09V⎓1.90A

Now we will carry out the same measurements by connecting this power supply with a volt-ampere meter using the cable being tested
Idling - 5.21V⎓0.00A


When connecting a resistor in “1 A” mode - 4.94V⎓0.85A


... in “2 A” mode - 4.81V⎓1.64A

Let me summarize briefly:

Functional light indication
+ adequate voltage and current values

Misunderstandings with the description (length - ? and where is blue?)

P.S. Now I say goodbye. Be kind(!)

I'm planning to buy +25 Add to favorites I liked the review +27 +47

Almost every smartphone owner has to deal with replacing the charging cable. There are many options here: from expensive original accessories to cheap cords of dubious manufacture. Whichever one you choose, there are a few things to consider when purchasing.

Determine the cord type

An obvious but necessary step. There are several types of smartphone charging cables. The most common is a cable with a microUSB connector. However, some modern phones use USB Type-C. This plug differs from the previous one in that it can be inserted into the connector on either side. iPhone cords use Lightning. By the way, when purchasing such a cable, you need to look for the MFi inscription on the packaging - it indicates that the product is certified by Apple.

Where can I get it?

Check the current capacity of the cord

The original cords are designed for the current supplied Charger. When purchasing a cheaper accessory, be sure to check what current this cable can carry. If, for example, the charger produces 2 A, but the cord can only transmit 0.6–0.7 A, then the charging time of the smartphone will increase significantly, and in some cases the gadget may not charge at all. Sometimes, due to such cords, the smartphone battery fails.

The current strength that the cable conducts can be indicated on the packaging of the accessory or given in the product description in the online store.

Decide on the form

Charging cords mainly come in three types: round, flat and twisted. The first type is the most common. It is characterized by durability and long service life. The second one is well suited for travel, as it gets tangled less and takes up almost no space when folded. The third is designed for charging in cars: such a cable will not get tangled underfoot.

Where can I get it?

Select braid material

The braid of the cord can be made of plastic, fabric, metal, silicone, leather. The most short-lived are cords with plastic braiding. The most durable and reliable ones are made from metal, but they are expensive. Cords with fabric braiding are less prone to damage, so they are well suited for constant carrying.

My smartphone does not have an LED charge indicator. And sometimes it’s difficult to understand whether it’s charging inside or not; you have to unblock it and see for yourself. And this is inconvenient because I’m lazy. There are several ways to get out of this situation, and the most budget-friendly of them is described below.
And so... the cable is OEM, comes without anything and looks similar to many of its no-name brothers.


The USB connector is no different at all; the same topology and the same workmanship.


But the micro-USB connector is more interesting in this context. Its insides are made of transparent plastic and thereby serve as a light guide.


A few more words about the cable itself...
The stated length of 1 (one) meter does not correspond. More specifically, it exceeds (!). In fact, we have about 120 cm.


The diameter including the braid is approx. 4 mm. The braid, by the way, is dense and even. It's quite pleasant to the touch - it's nylon after all.


Let's take a closer look at the main feature - light signaling.
When power is applied, the transparent base of the micro-USB connector begins to glow and changes its color a couple of times from green to red and vice versa. This process is quite fast, happening in about a second. Ultimately, the light guide begins to glow an even green color. The glow is not bright, does not irritate or distract. No blinking, sticking, ripples, trembling or other special effects were noticed.


The color changing show is repeated when a load is connected (in the form of a half-starved tablet). The color changes again a couple of times, but now it stops at a solid red.


This continues until the current in the circuit drops to a quarter ampere.


The value of 0.25 amperes is the threshold value, overcoming which signals the end of the charge and is accompanied by a change in the color of the indicator from red to green. But here, without any frills, click and that’s it.


): I was unable to achieve the promised sky-blue glow (as in the seller’s photographs). For me this is not critical; a two-color display is enough for me. But as they say, a sediment remains... in general, it seems that the photographs in the description were taken from a different revision/model of the cable.
Also, I was not able to pass a current of 5 volts / 2 amperes through this cord. Although the results turned out to be quite good, especially considering the length and origin of the cable. Somehow, I was able to record 4.81 volts at 1.64 amps.

Electrical measurements

To make the picture objective, let’s first test the Prestigio HKA01105021-XE power supply.


Its performance characteristics in practice look like this:
Idling - 5.23V⎓0.00A


When connecting a resistor in “1 A” mode - 5.04V⎓0.96A


... in “2 A” mode - 5.09V⎓1.90A

Now we will carry out the same measurements by connecting this power supply with a volt-ampere meter using the cable being tested
Idling - 5.21V⎓0.00A


When connecting a resistor in “1 A” mode - 4.94V⎓0.85A


... in “2 A” mode - 4.81V⎓1.64A

Let me summarize briefly:

Functional light indication
+ adequate voltage and current values

Misunderstandings with the description (length - ? and where is blue?)

P.S. Now I say goodbye. Be kind(!)